[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: LSI MegaRAID SAS 9240-4i hangs system at boot

On Sat, 19 May 2012 04:19:33 -0500, Stan Hoeppner wrote:

> On 5/19/2012 2:52 AM, Ramon Hofer wrote:
>> On Fri, 18 May 2012 17:57:56 -0500, Stan Hoeppner wrote:
>>> On 5/18/2012 9:39 AM, Shane Johnson wrote:
>>>> After that I would look to see if
>>>> something isn't shorting out a USB port.
>>> Yes, USB is the cause of the over-current errors, which is plainly
>>> evident in his screen shot.  But we don't yet know if this USB problem
>>> is what's hanging the system.  Further troubleshooting is required.
>> The strange thing is as I mentioned in another post is that on the mb
>> usb port 8 there's nothing attached and I haven't found where port 7 is
>> :-?
> I wouldn't worry about the USB errors at this point.  Unless there is
> some larger issue with insufficient power on the motherboard causing the
> USB current error, it's likely unrelated to the storage hardware issue.
>  Fix it first, then worry about the USB errors.  Given you have no
> device plugged into those ports, it could be a phantom error.

Yes I hope you're right with the phantom error :-)
Especially because I can't find port 7. No label on the mb pcb nor in 
it's documentation.

Best regards

Reply to: