[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: monitor detection maybe not working

On 07/01/2011 03:46 PM, Brian wrote:
On Fri 01 Jul 2011 at 15:19:21 -0700, Paul Scott wrote:

VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
    1024x768       60.0*
    800x600        60.3     56.2
    848x480        60.0
    640x480        59.9
My LCD monitor's native resolution is 1280x1024
xrandr believes VGA-1 is only capable of 1024x768.  Why do you believe
1280x1024 is possible?

1.  The monitor keeps telling me it works better at 1280x1024.

2.  ddcprobe gives several 1280x1024 choices.



[sudo] password for paul:
vbe: VESA 3.0 detected.
vendor: NVIDIA Corporation
product: CR17 Board Chip Rev A3
memory: 32768kb
mode: 640x400x256
mode: 640x480x256
mode: 800x600x16
mode: 800x600x256
mode: 320x200x64k
mode: 320x200x16m
mode: 640x480x64k
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
edid: 1 3
id: 631e
eisa: VSC631e
serial: dadb6101
manufacture: 34 2006
input: sync on green, analog signal.
screensize: 34 27
gamma: 2.200000
dpms: RGB, active off, no suspend, no standby
timing: 720x400@70 Hz (VGA 640x400, IBM)
timing: 720x400@88 Hz (XGA2)
timing: 640x480@60 Hz (VGA)
timing: 640x480@67 Hz (Mac II, Apple)
timing: 640x480@72 Hz (VESA)
timing: 640x480@75 Hz (VESA)
timing: 800x600@60 Hz (VESA)
timing: 800x600@72 Hz (VESA)
timing: 800x600@75 Hz (VESA)
timing: 832x624@75 Hz (Mac II)
timing: 1024x768@87 Hz Interlaced (8514A)
timing: 1024x768@70 Hz (VESA)
timing: 1024x768@75 Hz (VESA)
timing: 1280x1024@75 (VESA)
ctiming: 1280x1024@60
ctiming: 1280x960@60
ctiming: 1152x864@75
ctiming: 1024x768@85
ctiming: 800x600@85
ctiming: 640x480@85
dtiming: 1280x1024@70
monitorserial: QAG063401932
monitorrange: 30-82, 50-85
monitorname: VA703-3Serie

Paul Scott
Southern Arizona Symphony Orchestra

Reply to: