Re: [OT] Network Bizzard
Thank for you replies,
Once those 3 PCs on level 5 turn on, after a few minutes, level 4 and 5 loose connections
The PCs starting to throws errors IP duplications
As I mentioned, DHCP server is on Netgear FVS318v3
I should mentioned earlier, the cabling are straight to the switches are
Netgear -> G1, one Cat5e cable
G1 -> G2, two Cat5e connected each other
<Stan>
>If you would provide us with the brand and model of the switches we could
>probably tell you pretty quickly if they support link aggregation or not.
Switches model: TP-SG1016 from TPLink (http://www.tp-link.com.au/products/productDetails.asp?class=&content=spe&pmodel=TL%2DSG1016)
<Camaleón>
>I assume both swicthes are unmanageable layer 2, 16-port gigabit standard
>switches and all ports MID/MDIX capable so nor "up-link" ports nor
>crossover cable is needed.
>The more details you provide (cabling management details?, are there
>pacth panels in use or just direct plug to the swtich...?) the better.
Both switches are supports Auto-MDI/MDIX function
The cabling between G1 and G2 are direct cable/direct plug to the switch
Reply to: