[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Configuration problem of two NIC



I have two NIC. one is connected to a private network. and ip of that network is determined by dhcp.

another NIC is connected to another network. for that network, ip is specifically assigned by the network administrator of that network.

eth0 is connected to that dedicated line and eth1 is connected to my office network.

i'm giving the configuration of the two network.


ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:24:1D:7E:5E:4D
inet addr:192.168.250.186 Bcast:192.168.250.191 Mask:255.255.255.248
inet6 addr: fe80::224:1dff:fe7e:5e4d/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:8 errors:0 dropped:3651666419 overruns:0 frame:0
TX packets:65 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:640 (640.0 b) TX bytes:12065 (11.7 KiB)
Interrupt:16 Base address:0x8000

eth1 Link encap:Ethernet HWaddr 00:21:27:FC:60:BB
inet addr:192.168.12.11 Bcast:192.168.12.255 Mask:255.255.255.0
inet6 addr: fe80::221:27ff:fefc:60bb/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:115 errors:0 dropped:0 overruns:0 frame:0
TX packets:78 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0

route -n

Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.250.184 0.0.0.0 255.255.255.248 U 0 0 0 eth0
192.168.12.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1
0.0.0.0 192.168.12.1 0.0.0.0 UG 0 0 0 eth1


Reply to: