Re: Changing NIC in existing Server results in no ETH0
On Mon Oct 13, 2008 at 16:55:06 +0200, Nyizsnyik Ferenc wrote:
> > What is it that the install routine does that finds the NIC's. Is
> > this a command line (something) that can (should) be run manually
> ethx devices always correspond to the one NIC they were created for.
> Your new NIC is working as eth1, I assume.
Indeed, I'd suspect udev is the culprit here. If it is your
device will appear if you run "ifconfig -a".
If that is the case take a look beneath /etc/udev.d/rules.d/ and
you'll find the old device + MAC address recorded away.
Steve
--
Managed Anti-Spam Service
http://mail-scanning.com/
Reply to: