Re: cdrecord - need for troubleshoot help
I have tried couple of them but the same result. Which driver exactly
do you have in mind?
thank you
On Mon, Oct 6, 2008 at 8:16 PM, Lalit Dhiri <my_linux@live.com> wrote:
>
> Try changing the driver selection in K3B. I think you'll find this at K3b configure> Devices> Cdrdao driver.
>
> Linux the Root to no GPFs
>
>> Date: Mon, 6 Oct 2008 16:50:48 +1100
>> From: linuksos@gmail.com
>> To: debian-user@lists.debian.org
>> Subject: cdrecord - need for troubleshoot help
>>
>> Hello Guys,
>>
>> I'm trying to erase and burn my cd-rw. I'm sure that there is no
>> problem with my cd-rw media as it works on my other system. After
>> unsuccessful attempt to burn it with k3b I have gone to command line
>> to see what is going on. For command line I have followed steps
>> described here:
>> http://www.linuxconfig.org/Create_and_burn_ISO_images_with_mkisofs_%26_cdrecord
>>
>> Here is a output, everything looks fine but last 6 lines. Help is much
>> appreciated. Thank you
>>
>> OUTPUT:
>>
>>
>> wodim: No write mode specified.
>> wodim: Asuming -tao mode.
>> wodim: Future versions of wodim may have different drive dependent defaults.
>> TOC Type: 1 = CD-ROM
>> scsidev: '/dev/hdc'
>> devname: '/dev/hdc'
>> scsibus: -2 target: -2 lun: -2
>> Linux sg driver version: 3.5.27
>> Wodim version: 1.1.2
>> SCSI buffer size: 64512
>> atapi: 1
>> Device type : Removable CD-ROM
>> Version : 0
>> Response Format: 2
>> Capabilities :
>> Vendor_info : 'COMPAL '
>> Identification : 'TSD80Y1 DVD RW '
>> Revision : 'D010'
>> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
>> Current: 0x000A (CD-RW)
>> Profile: 0x001B (DVD+R)
>> Profile: 0x001A (DVD+RW)
>> Profile: 0x0014 (DVD-RW sequential recording)
>> Profile: 0x0013 (DVD-RW restricted overwrite)
>> Profile: 0x0011 (DVD-R sequential recording)
>> Profile: 0x0010 (DVD-ROM)
>> Profile: 0x000A (CD-RW) (current)
>> Profile: 0x0009 (CD-R)
>> Profile: 0x0008 (CD-ROM)
>> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
>> Driver flags : MMC-3 SWABAUDIO BURNFREE
>> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
>> Drive buf size : 1638400 = 1600 KB
>> Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
>> communication breaks or freezes immediately after that.
>> Drive DMA Speed: 4449 kB/s 25x CD 3x DVD
>> FIFO size : 12582912 = 12288 KB
>> Track 01: data 556 MB
>> Total size: 639 MB (63:21.21) = 285091 sectors
>> Lout start: 639 MB (63:23/16) = 285091 sectors
>> Current Secsize: 2048
>> ATIP info from disk:
>> Indicated writing power: 2
>> Reference speed: 6
>> Is not unrestricted
>> Is erasable
>> Disk sub type: High speed Rewritable (CAV) media (1)
>> ATIP start of lead in: -11077 (97:34/23)
>> ATIP start of lead out: 359849 (79:59/74)
>> 1T speed low: 4 1T speed high: 10
>> 2T speed low: 2 2T speed high: 10
>> power mult factor: 2 6
>> recommended erase/write power: 5
>> A1 values: 24 2C DC
>> A2 values: 14 A4 4A
>> A3 values: 04 C4 80
>> Disk type: Phase change
>> Manuf. index: 11
>> Manufacturer: Mitsubishi Chemical Corporation
>> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 74758
>> Speed set to 2116 KB/s
>> Starting to write CD/DVD at speed 12.0 in real TAO mode for single session.
>> Last chance to quit, starting real write 0 seconds. Operation starts.
>> Waiting for reader process to fill input buffer ... input buffer ready.
>> Performing OPC...
>>
>>
>> Errno: 0 (Success), send opc scsi sendcmd: no error
>> CDB: 54 01 00 00 00 00 00 00 00 00
>> status: 0x4 (CONDITION MET/GOOD)
>> cmd finished after 60.053s timeout 60s
>> wodim: OPC failed.
>> Writing time: 174.939s
>>
>>
>>
>> --
>> lubo
>> http://www.linuxconfig.org/
>>
>>
>> --
>> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
>> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>>
>
> _________________________________________________________________
> Win New York holidays with Kellogg's & Live Search
> http://clk.atdmt.com/UKM/go/111354033/direct/01/
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
>
--
lubo
http://www.linuxconfig.org/
Reply to: