RE: cdrecord - need for troubleshoot help
Try changing the driver selection in K3B. I think you'll find this at K3b configure> Devices> Cdrdao driver.
Linux the Root to no GPFs
> Date: Mon, 6 Oct 2008 16:50:48 +1100
> From: linuksos@gmail.com
> To: debian-user@lists.debian.org
> Subject: cdrecord - need for troubleshoot help
>
> Hello Guys,
>
> I'm trying to erase and burn my cd-rw. I'm sure that there is no
> problem with my cd-rw media as it works on my other system. After
> unsuccessful attempt to burn it with k3b I have gone to command line
> to see what is going on. For command line I have followed steps
> described here:
> http://www.linuxconfig.org/Create_and_burn_ISO_images_with_mkisofs_%26_cdrecord
>
> Here is a output, everything looks fine but last 6 lines. Help is much
> appreciated. Thank you
>
> OUTPUT:
>
>
> wodim: No write mode specified.
> wodim: Asuming -tao mode.
> wodim: Future versions of wodim may have different drive dependent defaults.
> TOC Type: 1 = CD-ROM
> scsidev: '/dev/hdc'
> devname: '/dev/hdc'
> scsibus: -2 target: -2 lun: -2
> Linux sg driver version: 3.5.27
> Wodim version: 1.1.2
> SCSI buffer size: 64512
> atapi: 1
> Device type : Removable CD-ROM
> Version : 0
> Response Format: 2
> Capabilities :
> Vendor_info : 'COMPAL '
> Identification : 'TSD80Y1 DVD RW '
> Revision : 'D010'
> Device seems to be: Generic mmc2 DVD-R/DVD-RW.
> Current: 0x000A (CD-RW)
> Profile: 0x001B (DVD+R)
> Profile: 0x001A (DVD+RW)
> Profile: 0x0014 (DVD-RW sequential recording)
> Profile: 0x0013 (DVD-RW restricted overwrite)
> Profile: 0x0011 (DVD-R sequential recording)
> Profile: 0x0010 (DVD-ROM)
> Profile: 0x000A (CD-RW) (current)
> Profile: 0x0009 (CD-R)
> Profile: 0x0008 (CD-ROM)
> Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
> Driver flags : MMC-3 SWABAUDIO BURNFREE
> Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
> Drive buf size : 1638400 = 1600 KB
> Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
> communication breaks or freezes immediately after that.
> Drive DMA Speed: 4449 kB/s 25x CD 3x DVD
> FIFO size : 12582912 = 12288 KB
> Track 01: data 556 MB
> Total size: 639 MB (63:21.21) = 285091 sectors
> Lout start: 639 MB (63:23/16) = 285091 sectors
> Current Secsize: 2048
> ATIP info from disk:
> Indicated writing power: 2
> Reference speed: 6
> Is not unrestricted
> Is erasable
> Disk sub type: High speed Rewritable (CAV) media (1)
> ATIP start of lead in: -11077 (97:34/23)
> ATIP start of lead out: 359849 (79:59/74)
> 1T speed low: 4 1T speed high: 10
> 2T speed low: 2 2T speed high: 10
> power mult factor: 2 6
> recommended erase/write power: 5
> A1 values: 24 2C DC
> A2 values: 14 A4 4A
> A3 values: 04 C4 80
> Disk type: Phase change
> Manuf. index: 11
> Manufacturer: Mitsubishi Chemical Corporation
> Blocks total: 359849 Blocks current: 359849 Blocks remaining: 74758
> Speed set to 2116 KB/s
> Starting to write CD/DVD at speed 12.0 in real TAO mode for single session.
> Last chance to quit, starting real write 0 seconds. Operation starts.
> Waiting for reader process to fill input buffer ... input buffer ready.
> Performing OPC...
>
>
> Errno: 0 (Success), send opc scsi sendcmd: no error
> CDB: 54 01 00 00 00 00 00 00 00 00
> status: 0x4 (CONDITION MET/GOOD)
> cmd finished after 60.053s timeout 60s
> wodim: OPC failed.
> Writing time: 174.939s
>
>
>
> --
> lubo
> http://www.linuxconfig.org/
>
>
> --
> To UNSUBSCRIBE, email to debian-user-REQUEST@lists.debian.org
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
>
_________________________________________________________________
Win New York holidays with Kellogg’s & Live Search
http://clk.atdmt.com/UKM/go/111354033/direct/01/
Reply to: