Re: Catalyst on new install
On Sun, 2008-10-05 at 15:18 +0200, Pal Trendweaver wrote:
> Hello,
>
> I'm trying to install Catalyst on my newly installed computer, however
> the aticonfig --initial doesn't update my xorg.conf properly.
> I'm new to ATI (I've used the Nvidia prop. driver for years and
> installed it dozens of times) and I need some help on this.
> I tried to find some help on the forums here and there, but I can't
> seem to find a satisfactory solution.
>
Hi,
First of all a more descriptive title would help (e.g. problem with
fglrx). I have my working xorg.conf attached for reference. It seems
that your missing the dri section. Is fgrlx loaded? What's the output of
lsmod | grep fglrx?
--
Regards,
Aniruddha
### This file was generated by xac v0.6_pre3
Section "ServerLayout"
Identifier "XAC Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
### Multiple FontPath entries are allowed (which are concatenated
### together as well as specifying multiple comma-separated
### entries in one FontPath command (or both methods)
###
### For X Font Server support, uncomment this and comment the
### other FontPaths. (This is not required for most configurations)
# FontPath "unix/:-1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/default/ghostscript"
FontPath "/usr/share/fonts/dejavu"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "record"
Load "glx"
Load "type1"
Load "freetype"
Load "dri"
EndSection
Section "ServerFlags"
Option "blank time" "10" # 10 Minutes
Option "standby time" "20" # 20 Minutes
Option "suspend time" "30" # 30Minutes
Option "off time" "60" # 60Minutes
### Uncomment so X doesn't fail when no mouse is available
# Option "AllowMouseOpenFail" "true"
### Enable this option if X should not change resolutions
### This is useful if mode changing corrupts the X Server
# Option "DisableVidModeExtensions" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
### Check /usr/share/X11/xkb/rules/xorg.lst for available models
Option "XkbdModel" "pc105"
### Check /usr/share/X11/xkb/symbols/ for available layouts
Option "XkbLayout" "us"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto"
### Set driver options:
### No options set!
### Unset driver options:
### No options unset!
EndSection
Section "Device"
Identifier "Card0"
Driver "fglrx"
EndSection
Section "Monitor"
Identifier "Monitor0"
UseModes "Modes0"
ModelName "BenQ G2400W"
Option "DPMS"
Option "ReducedBlanking"
HorizSync 31-94
VertRefresh 50-85
EndSection
Section "Modes"
Identifier "Modes0"
### # 1920x1200 59.95 Hz (CVT 2.30MA-R) hsync: 74.04 kHz; pclk: 154.00 MHz
Modeline "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync
### # 720x400 59.55 Hz (CVT) hsync: 24.83 kHz; pclk: 22.25 MHz
Modeline "720x400" 22.25 720 744 808 896 400 403 413 417 -hsync +vsync
### # 256x341 59.09 Hz (CVT) hsync: 21.09 kHz; pclk: 6.75 MHz
Modeline "256x341" 6.75 256 264 288 320 341 344 354 357 -hsync +vsync
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 8
Virtual 1920 1200
Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" "720x400" "640x480" "640x480" "800x600" "256x341"
EndSubSection
SubSection "Display"
Depth 16
Virtual 1920 1200
Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" "720x400" "640x480" "640x480" "800x600" "256x341"
EndSubSection
SubSection "Display"
Depth 24
Virtual 1920 1200
Modes "1920x1200" "720x400" "640x480" "640x480" "800x600" "720x400" "720x400" "640x480" "640x480" "800x600" "256x341"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Reply to: