LAP:/# kill artsd
-su: kill: artsd: arguments must be process or job IDs
Ken, you need further manual reading about processes "management".
man ps
man kill
man killall
> LAP:~# /etc/alsa reload
> -su: /etc/alsa: is a directory
>
> sorry, it was /etc/init.d/alsa reload
LAP:/# /etc/init.d/alsa reload
Unloading ALSA sound driver modules: snd-opl3sa2 snd-opl3-lib snd-hwdep
snd-cs4231-lib snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc
snd-mpu401-uart snd-seq-dummy snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-timer snd-rawmidi snd-seq-device.
Loading ALSA sound driver modules: snd-opl3sa2 snd-opl3-lib snd-hwdep
snd-cs4231-lib snd-pcm-oss snd-mixer-oss snd-pcm snd-page-alloc
snd-mpu401-uart snd-seq-dummy snd-seq-oss snd-seq-midi
snd-seq-midi-event snd-seq snd-timer snd-rawmidi snd-seq-device.
that's ok
>
> ah...
> I read from this page:
> This module does not support auto probe (if ISA PnP is not used) thus
> all ports must be specified!!!
>
> Not 100% sure, but probably isa-pnp kernel module is needed for this
> card to be properly configured.
> grep isa-pnp /etc/modules
>
> if #isa-pnp line appears I suggest you to uncomment it and reboot.
No isa-pnp line in /etc/modules.
However, I did find:
LAP:/# find -iname isa
./sys/bus/isa
./sys/devices/isa
./usr/src/linux-headers-2.6.18-4/sound/isa
./usr/src/linux-headers-2.6.18-4-686
/include/config/isa
./usr/src/linux-headers-2.6.18-4-686/include/config/generic/isa
./lib/modules/2.6.18-3-686/kernel/sound/isa
./lib/modules/2.6.18-4-686/kernel/sound/isa
LAP:/# find -iname isa-pnp
LAP:/#
I am using kernel 2.6.18-4-686.
no isa-pnp module to load...
... I think you need some isa related tool to deal with this card or an isa capable kernel, i.e. recompile with isa support flag turned on.
I don't want to mislead you but I would go this way.
Ken Heard
raffaele