Marty wrote:
David Shultz wrote:On 1/7/07, Marty <martyb@ix.netcom.com> wrote:I see where the Display Data Channel (or DDC protocol, which IDs your monitor) module (ddc) is loaded, but none of the output. Maybe you are missing the I2C drivers for your motherboard or the graphics card drivers, both of which are required. I would expect to get away with generic monitor settings with a CRT, but probably not with non-CRT display.Thanks for detecting that. Sorry for my ignorance but how do i load i2c driverI don't know how you do it, but first I look at the motherboard to see which I2C chip it uses and then compile the driver into the kernel. If I used modules I would probably just load them all up and see which one works.
Install the package lm-sensors and run sensors-detect, it will even write the modules to /etc/modules for you.
HTH Wackojacko