Re: monitor PC2000 F17 69T technical informations?
On Sun, Aug 21, 2005 at 03:04:46PM -0400, Kevin Carney wrote:
> Sorry to hear that read-edid did not work for you.
> Perhaps PC2000 is not the manufacturer. I seem to remember a monitor
Yes, You are right!
I have a look at the backside of the monitor and there see the
manufacturers name: KAGA ELECTRONICS CO., LTD.
> Other than that, I found:
> <http://www.si87.com/MonitorSolutions/kaga/fi769mt.html>,
> <http://www.si87.com/MonitorSolutions/pc2000/f1785t.html>,
> <http://www.forum.linux-sevenler.org/index.php/topic,866.0.html>,
> Which may be close enough.
Thanks!
http://www.monitorworld.com/Monitors/kaga/fi769mt.html
> Also, if it is a 17" monitor (which I suspect it is), then you can't go
> wrong with the settings:
> Horz 35-60
> Vert 55-90
Yes, it is a 17" monitor.
> These are VERY conservitive settings; you could probably go as high as
> 30-65,50-100 without worry.
Okay, my .videogen is:
mode 1024x768
nvidia off
max_dotclk=68 # Monitors maximum dot rate.
max_hfreq=69; max_vfreq=120
videogen generate now this:
Modeline "1024x768" 68.00 1024 1056 1088 1312 768 770 773 808 # 68 \
MHz, 51.8 kHz, 64.1 Hz
May I increase the max_dotclk slowly to get the 85 Hz vertical refresh
rate?
Because I have the dual boot system (Debian Sarge and Windows 2000) I
get in the Windows system these settings:
1024x768 68.6 kHz 85 Hz (Mode 01 - I dont know what is it mean.)
--
Regards,
Paul
Debian Junior Project, DebianEdu, Moodle -> :-) :-) :-) :-) :-) :-) :-)
http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.)
Reply to: