Re: monitor PC2000 F17 69T technical informations?
On Sun, Aug 21, 2005 at 06:24:34PM +0200, Alexander Schmehl wrote:
> * Csanyi Pal <csanyipal@sks.co.yu> [050821 17:18]:
> > I have the monitor PC2000 F17 69T.
> > It was given to me yesterday, but without the manual.
> > I need the technical informations bellow to set up my X Window:
> [..]
> > Has anybody these informations? If so, please tell me! Thanks!
>
> Take a look at read-edid [1], which might find that information for you.
sudo get-edid
get-edid: get-edid version 1.4.1
Performing real mode VBE call
Interrupt 0x10 ax=0x4f00 bx=0x0 cx=0x0
Function supported
Call successful
VBE version 300
VBE string at 0x11110 "Brookdale-G Graphics Chip Accelerated VGA BIOS"
VBE/DDC service about to be called
Report DDC capabilities
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x0 cx=0x0
Function supported
Call successful
Monitor and video card combination does not support DDC1 transfers
Monitor and video card combination does not support DDC2 transfers
0 seconds per 128 byte EDID block transfer
Screen is not blanked during DDC transfer
Reading next EDID block
VBE/DDC service about to be called
Read EDID
Performing real mode VBE call
Interrupt 0x10 ax=0x4f15 bx=0x1 cx=0x0
Function supported
Call failed
The EDID data should not be trusted as the VBE call failed
Error: output block unchanged
Thank you Alexander, but as You see abowe, I can't get the wanted
informations.
--
Regards,
Paul
Debian Junior Project, DebianEdu, Moodle -> :-) :-) :-) :-) :-) :-) :-)
http://www.ektf.hu/~Csanyi.Pal (Up to now, it is in Hungarian only.)
Reply to: