[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: RAID 1 : DEBIAN (WOODY) b2.4 - compatible Parallel ATA disk / compatible hardware RAID 1 controller



On Sun, 2005-01-30 at 15:33 +0100, Christopher Pharo Glæserud wrote:
> Ron Johnson, 
> 
> > > > --- UK-based DEBIAN (WOODY) b2.4 compatible Parallel ATA disk
> > > > controller - for use with software RAID 1? So have two IDE drives each
> > > > on separate disk controller - hence looking for tried and tested
> > > > second disk controller.
> > > 
> > > I'm using two HighPoint Ultra 100TX controller (PDC20268) with 2
> > > channels each supporting 4x200GB Maxtor drives. Under 2.6 these
> > > controllers have been quite straight-forward. I do, however, remember
> > > some initial trouble under 2.4 (which drivers to include, etc.) and some
> > > trouble getting the DMA to turn on automatically (hdparm + init solved
> > > that one). Other than that they have behaved exemplary.
> > > 
> > > (My post of some weeks back where the wrong drive was marked as failed
> > > by mdadm I don't think was due to the controller.)
> > 
> > You are using software RAID, right?
> 
> Yes, that's were the mdadm part comes to play. (The controllers are
> promise 100TX2, not highpoint, my mistake) Current setup is

That's what I thought, but that does not seem to be what OP is
asking for:
"b2.4 compatible hardware RAID 1 controller?"
"looking for tried and tested second disk controller."

It looks like he's asking for 2 different things at the same time. :\

[snip]


-- 
-----------------------------------------------------------------
Ron Johnson, Jr.
Jefferson, LA USA
PGP Key ID 8834C06B I prefer encrypted mail.

"Microkernels have won."
Andrew Tanenbaum, January 1992

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: