Re: kernel 2.6.9.2-k7 and ne2k-pci
*snip*
>>
>
>I don't know how did you ended having three entries of the "natsemi"
>modules, maybe you have some program to help managing modules. Anyway,
>do you really have two NIC, the "natsemi" and the "ne2k-pci"?
I am not sure how I have all of these entries either. I deleted all
of the natsemi and pci-scan entries.
>
>Some modules listed above don't exist on a 2.6.9 kernel, like the
>"usb-uhci" and "pci-scan". I didn't asked cause it should be a
>dependency of the 2.6.x kernels, but did you have the
>"module-init-tools" installed?
>
>Try to reconfigure "hotplug", with something like "dpkg-reconfigure
>-plow hotplug", as it should ask about and how enabling your NIC, and
>modify your /etc/network/interfaces accordingly...
It did and I used the /etc/network/interfaces file as it was w/ my
2.4 kernel. I still have to load the ne2k-pci module, lsmod still
shows the natsemi module, I still have to ipconfig eth0 and I have
to add the route to the gateway.
I have also done dpkg-reconfigure -plow hotplug and reconfigured
to read all interfaces from my /etc/network/interfaces file.
I don't understand how natsemi continues to be loaded as shown by
lsmod ... or if that is the crux of my problem.
----------------------------------------------------------------------
Zero Crossings, Inc. -- Embedded and Digital Signal Processing Systems
http://www.zerocrossings.com/
Reply to: