Re: Re. CD writer
I must confess that I am still confused although the
messages here are helping.
When I look at my installed Debian packages, I have:
kernel-image-2 Custom.2 (the last one that I made).
The only things that I have in /etc/modules are:
af_packet
sr_mod
If I knew how you printed out "make config" below, I
might learn something. I used xconfig, but I assume
that if you can print one, you can print the other.
--- Luc Lefebvre <luc.lefebvre@mcgill.ca> wrote:
> Hi,
>
> I am using Libranet 2.8.1 (Debian based distro,
> mostly testing and
> stable mix) and have compiled 2.4.21 successfully
> and can burn CDs. My
> .config file is included as an attachment. Hope
> this helps.
>
>
> On Wed, Oct 15, 2003 at 02:06:48PM -0400, Antonio
> Rodr wrote:
> > > I am reaching a stage of complete frustration in
> my
> > > effort to install a CD writer. I have Debian
> woody
> > > with a 2.4.22 kernel that I got from
> www.kernel.org.
> > >
> > > My effort to configure the kernel for the scsi
> > > emulation always fails. I am following the
> > > instructions of: Linux-1U.net/CDRW CDRW-Writing
> > > uHOWTO. Every time I follow their instructions,
> > > including taking out all reference to ide from
> the
> > > configuration menu, I still end up with ide not
> sg
> > > when I do /proc/devices.
> >
> > I want you to know that you are not alone. I
> haven't been able to make
> > my cd drives look scsi, when I remove all ide to
> cd drives, my system
> > goes crazy and it never goes beyond IRQ-madness,
> without ever the kernel
> > getting to boot completely. In my case I am afraid
> that it is a
> > difficult hardware the culprit. If you want I can
> send you that image
> > (2.4.22, compiled with kernel package), which
> might work for you. I had
> > to revert to ide.>
> > > The only thing that I find strange in my
> procedure is
> > > that in compiling the kernel, my instructions
> (from
> > > Custom Kernel Compiling in Debian 2.2 by
> Jeepsta) use
> > > kernel_image, but when I make the debian
> package, the
> > > instructions call for kernel-image.Nevertheless,
> I
> >
> > That is normal (the _ - change). In general,
> kernels 2.4.22 and 2.4.21
> > have proved difficult for me. An interesting
> detail is that Knoppix does
> > the scsi change in the same machine very well. I
> haven't been able to
> > reproduce it. Any ideas, list?
>
> --
> Luc Lefebvre
>
> In the beginner's mind there are many possibilities,
> in the expert's mind there are few. <Shunryu
> Suzuki>
>
> Key fingerprint = D2E5 5E35 B910 6F4E 0242 EC63
> 0FD9 96D0 C7F4 784E
> > #
> # Automatically generated make config: don't edit
> #
> CONFIG_X86=y
> # CONFIG_SBUS is not set
> CONFIG_UID16=y
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # Processor type and features
> #
> # CONFIG_M386 is not set
> # CONFIG_M486 is not set
> # CONFIG_M586 is not set
> # CONFIG_M586TSC is not set
> # CONFIG_M586MMX is not set
> # CONFIG_M686 is not set
> # CONFIG_MPENTIUMIII is not set
> CONFIG_MPENTIUM4=y
> # CONFIG_MK6 is not set
> # CONFIG_MK7 is not set
> # CONFIG_MK8 is not set
> # CONFIG_MELAN is not set
> # CONFIG_MCRUSOE is not set
> # CONFIG_MWINCHIPC6 is not set
> # CONFIG_MWINCHIP2 is not set
> # CONFIG_MWINCHIP3D is not set
> # CONFIG_MCYRIXIII is not set
> # CONFIG_MVIAC3_2 is not set
> CONFIG_X86_WP_WORKS_OK=y
> CONFIG_X86_INVLPG=y
> CONFIG_X86_CMPXCHG=y
> CONFIG_X86_XADD=y
> CONFIG_X86_BSWAP=y
> CONFIG_X86_POPAD_OK=y
> # CONFIG_RWSEM_GENERIC_SPINLOCK is not set
> CONFIG_RWSEM_XCHGADD_ALGORITHM=y
> CONFIG_X86_L1_CACHE_SHIFT=7
> CONFIG_X86_HAS_TSC=y
> CONFIG_X86_GOOD_APIC=y
> CONFIG_X86_PGE=y
> CONFIG_X86_USE_PPRO_CHECKSUM=y
> CONFIG_X86_F00F_WORKS_OK=y
> CONFIG_X86_MCE=y
> CONFIG_TOSHIBA=m
> CONFIG_I8K=m
> # CONFIG_MICROCODE is not set
> # CONFIG_X86_MSR is not set
> # CONFIG_X86_CPUID is not set
> # CONFIG_NOHIGHMEM is not set
> CONFIG_HIGHMEM4G=y
> # CONFIG_HIGHMEM64G is not set
> CONFIG_HIGHMEM=y
> # CONFIG_HIGHIO is not set
> # CONFIG_MATH_EMULATION is not set
> CONFIG_MTRR=y
> # CONFIG_BIGPHYS_AREA is not set
> # CONFIG_SMP is not set
> # CONFIG_X86_UP_APIC is not set
> # CONFIG_X86_UP_IOAPIC is not set
> # CONFIG_X86_TSC_DISABLE is not set
> CONFIG_X86_TSC=y
>
> #
> # General setup
> #
> CONFIG_NET=y
> CONFIG_PCI=y
> # CONFIG_PCI_GOBIOS is not set
> # CONFIG_PCI_GODIRECT is not set
> CONFIG_PCI_GOANY=y
> CONFIG_PCI_BIOS=y
> CONFIG_PCI_DIRECT=y
> CONFIG_ISA=y
> CONFIG_PCI_NAMES=y
> # CONFIG_EISA is not set
> # CONFIG_MCA is not set
> CONFIG_HOTPLUG=y
>
> #
> # PCMCIA/CardBus support
> #
> CONFIG_PCMCIA=m
> CONFIG_CARDBUS=y
> CONFIG_TCIC=y
> CONFIG_I82092=y
> CONFIG_I82365=y
>
> #
> # PCI Hotplug Support
> #
> # CONFIG_HOTPLUG_PCI is not set
> # CONFIG_HOTPLUG_PCI_COMPAQ is not set
> # CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set
> # CONFIG_HOTPLUG_PCI_ACPI is not set
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_SYSCTL=y
> CONFIG_KCORE_ELF=y
> # CONFIG_KCORE_AOUT is not set
> CONFIG_BINFMT_AOUT=y
> CONFIG_BINFMT_ELF=y
> CONFIG_BINFMT_MISC=y
> CONFIG_PM=y
> CONFIG_ACPI=m
> # CONFIG_ACPI_DEBUG is not set
> CONFIG_ACPI_BUSMGR=m
> CONFIG_ACPI_SYS=m
> CONFIG_ACPI_CPU=m
> CONFIG_ACPI_BUTTON=m
> CONFIG_ACPI_AC=m
> CONFIG_ACPI_EC=m
> CONFIG_ACPI_CMBATT=m
> CONFIG_ACPI_THERMAL=m
> CONFIG_APM=m
> # CONFIG_APM_IGNORE_USER_SUSPEND is not set
> # CONFIG_APM_DO_ENABLE is not set
> # CONFIG_APM_CPU_IDLE is not set
> # CONFIG_APM_DISPLAY_BLANK is not set
> # CONFIG_APM_RTC_IS_GMT is not set
> # CONFIG_APM_ALLOW_INTS is not set
> # CONFIG_APM_REAL_MODE_POWER_OFF is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> # CONFIG_MTD is not set
>
> #
> # Parallel port support
> #
> CONFIG_PARPORT=m
> CONFIG_PARPORT_PC=m
> CONFIG_PARPORT_PC_CML1=m
> CONFIG_PARPORT_SERIAL=m
> # CONFIG_PARPORT_PC_FIFO is not set
> # CONFIG_PARPORT_PC_SUPERIO is not set
> CONFIG_PARPORT_PC_PCMCIA=m
> # CONFIG_PARPORT_AMIGA is not set
> # CONFIG_PARPORT_MFC3 is not set
> # CONFIG_PARPORT_ATARI is not set
> # CONFIG_PARPORT_GSC is not set
> # CONFIG_PARPORT_SUNBPP is not set
> # CONFIG_PARPORT_OTHER is not set
> CONFIG_PARPORT_1284=y
>
> #
> # Plug and Play configuration
> #
> CONFIG_PNP=m
> CONFIG_ISAPNP=m
>
> #
> # Block devices
> #
> CONFIG_BLK_DEV_FD=y
> # CONFIG_BLK_DEV_XD is not set
> CONFIG_PARIDE=m
> CONFIG_PARIDE_PARPORT=m
>
> #
> # Parallel IDE high-level drivers
> #
> CONFIG_PARIDE_PD=m
> CONFIG_PARIDE_PCD=m
> CONFIG_PARIDE_PF=m
> CONFIG_PARIDE_PT=m
> CONFIG_PARIDE_PG=m
>
> #
> # Parallel IDE protocol modules
> #
> CONFIG_PARIDE_ATEN=m
> CONFIG_PARIDE_BPCK=m
> CONFIG_PARIDE_BPCK6=m
> CONFIG_PARIDE_COMM=m
> CONFIG_PARIDE_DSTR=m
> CONFIG_PARIDE_FIT2=m
> CONFIG_PARIDE_FIT3=m
> CONFIG_PARIDE_EPAT=m
> CONFIG_PARIDE_EPATC8=y
> CONFIG_PARIDE_EPIA=m
> CONFIG_PARIDE_FRIQ=m
> CONFIG_PARIDE_FRPW=m
> CONFIG_PARIDE_KBIC=m
> CONFIG_PARIDE_KTTI=m
> CONFIG_PARIDE_ON20=m
> CONFIG_PARIDE_ON26=m
> CONFIG_BLK_CPQ_DA=m
> CONFIG_BLK_CPQ_CISS_DA=m
>
=== message truncated ===
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
Reply to: