Hercules 9800 Pro and XFree under unstable.
Hi,
I'm trying to get a Hercules Radeon 9800 Pro running with XFree86
(version 4.2.1) in Debian Unstable. After reading the readmes, I turned
the fglrx-glc22-4.2.0-2.9.13.i586.rpm into a deb with alien and
installed it. I rolled my own kernel (2.5.73), and tried to build the
FireGL kernel modules which failed (make.log at end of text). As these
modules shouldn't be necessary for the card to work minimally I carried
on. I ran fglrxconfig to configure the XFree86-4. Now when I run
'startx' all that happens is I get a black screen which stays there
until I hit ctrl-F1 which drops me back to the shell.
I don't know why the FireGL module isn't compiling, make.log looks like
there is a syntax error in the code? But from looking at the
XFree86.0.log (included later) it looks like my card fails with the DRI
(because I don't have the FireGL module?) so I remmed out the DRI line,
and the only other error I can see is that my card is a 'third party
card'. As mentioned, it's the Hercules 9800 Pro, which is an ATI card is
it not? *confused*
Anyway, included is my make.log from the FireGL modules, the
XFree86.0.log and my XF86Config-4. I hope I have supplied enough
information, thanks for the help!
Rus
--------------------------------------------
Make.log
--------------------------------------------
ATI module generator V 2.0
==========================
build_date =Sat Jul 12 16:14:19 BST 2003
uname -a =Linux faith 2.5.73 #2 Wed Jul 2 13:28:48 BST 2003 i686
GNU/Linux uname -s =Linux uname -m =i686 uname -r =2.5.73 uname -v =#2
Wed Jul 2 13:28:48 BST 2003
uid=0(root) gid=0(root) groups=0(root)
.
drwxr-xr-x 28 root root 8192 Jul 2 13:50 /usr/include
.
total 39576
-rwxr-xr-x 1 root root 39945 Jun 13 16:31
fglrx_panel_sources.tgz
-rwxr-xr-x 1 root root 17339 Jun 13 16:31
fglrx_sample_source.tgz
lrwxrwxrwx 1 root src 12 Jul 1 19:39 linux ->
linux-2.5.73
drwxrwxr-x 19 1046 ssh 4096 Jul 2 13:28 linux-2.5.73
-rwxr-xr-x 1 root src 40408607 Jul 1 19:37
linux-2.5.73.tar.gz
drwxr-xr-x 7 root root 4096 Jul 2 14:22 rpm
.
file /usr/src/linux/include/linux/agp_backend.h says: AGP=1 assuming
default: SMP=0 assuming default: MODVERSIONS=0 . CC=gcc cc_version=3.3.1
found major but not minor version match for gcc and the ip-library ls -l
libfglrx_ip.a
lrwxr-xr-x 1 root root 18 Jul 12 16:14 libfglrx_ip.a ->
libfglrx_ip.a.GCC3
.
probing for VMA API version...
cc_ret_vma_240 = 1
cc_ret_vma_253 = 0
def_vma_api_version=-DFGL_LINUX253P1_VMA_API
cleaning...
patching 'highmem.h'...
patching 'drmP.h'...
compiling 'agpgart_be.c'...
gcc -Wall -Wwrite-strings -Wpointer-arith -Wcast-align
-Wstrict-prototypes -Wpointer-arith -O2 -D__KERNEL__ -DMODULE
-fomit-frame-pointer -DATI_AGP_HOOK -DATI -DFGL -DFGL_RX
-DFGL_CUSTOM_MODULE -Dfglrx -Ipatch/include -Ipatch/drivers/char/drm
-I/usr/src/linux/include -c agpgart_be.c -o agpgart_be.o
In file included from /usr/src/linux/include/asm/processor.h:18,
from /usr/src/linux/include/asm/thread_info.h:13,
from /usr/src/linux/include/linux/thread_info.h:21,
from /usr/src/linux/include/linux/spinlock.h:12,
from /usr/src/linux/include/linux/capability.h:45,
from /usr/src/linux/include/linux/sched.h:7,
from /usr/src/linux/include/linux/module.h:10,
from agpgart_be.c:62:
/usr/src/linux/include/asm/system.h: In function `__set_64bit_var':
/usr/src/linux/include/asm/system.h:193: warning: dereferencing
type-punned pointer will break strict-aliasing rules
/usr/src/linux/include/asm/system.h:193: warning: dereferencing
type-punned pointer will break strict-aliasing rules
agpgart_be.c: In function `agp_free_memory_phys_list':
agpgart_be.c:358: warning: `MOD_DEC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:490)
agpgart_be.c: In function `__fgl_agp_allocate_memory_phys_list':
agpgart_be.c:388: warning: `MOD_INC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:478)
agpgart_be.c:394: warning: `MOD_DEC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:490)
agpgart_be.c: In function `__fgl_agp_free_memory':
agpgart_be.c:443: warning: `MOD_DEC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:490)
agpgart_be.c: In function `__fgl_agp_allocate_memory':
agpgart_be.c:468: warning: `MOD_INC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:478)
agpgart_be.c:475: warning: `MOD_DEC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:490)
agpgart_be.c: In function `agp_generic_agp_enable':
agpgart_be.c:895: warning: implicit declaration of function
`pci_for_each_dev'
agpgart_be.c:895: error: syntax error before '{' token
agpgart_be.c: At top level:
agpgart_be.c:924: error: syntax error before "if"
agpgart_be.c: In function `intel_i810_alloc_by_type':
agpgart_be.c:1556: warning: `MOD_INC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:478)
agpgart_be.c:1573: warning: `MOD_INC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:478)
agpgart_be.c: In function `intel_i810_free_by_type':
agpgart_be.c:1604: warning: `MOD_DEC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:490)
agpgart_be.c: In function `intel_i830_alloc_by_type':
agpgart_be.c:1872: warning: `MOD_INC_USE_COUNT' is deprecated (declared
at /usr/src/linux/include/linux/module.h:478)
compiling failed - object file was not generated
--------------------------------------------
XFree86.0.log
--------------------------------------------
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.2.1.1 (Debian 4.2.1-8 20030609132746 james@nocrew.org)
/ X Window System (protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 October 2002
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.21-rc1-ac1-cryptoloop i686 [ELF]
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Sat Jul 12 16:31:55 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Server Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "ATI Graphics Adapter"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "gb"
(**) XKB: layout: "gb"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to
"/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled
,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type
1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr
/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.5
XFree86 XInput driver : 0.3
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3189 card 1043,807f rev 00 class 06,00,00
hdr 00
(II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00
hdr 01
(II) PCI: 00:07:0: chip 1106,3044 card 1106,3044 rev 46 class 0c,00,10
hdr 00
(II) PCI: 00:08:0: chip 105a,3376 card 1043,809e rev 02 class 01,04,00
hdr 00
(II) PCI: 00:09:0: chip 14e4,4401 card 1043,80a8 rev 01 class 02,00,00
hdr 00
(II) PCI: 00:0b:0: chip 100b,0020 card 1385,f311 rev 00 class 02,00,00
hdr 00
(II) PCI: 00:0e:0: chip 1105,8300 card 0000,0000 rev 02 class 04,80,00
hdr 00
(II) PCI: 00:0f:0: chip 1102,0002 card 1102,8061 rev 07 class 04,01,00
hdr 80
(II) PCI: 00:0f:1: chip 1102,7002 card 1102,0020 rev 07 class 09,80,00
hdr 80
(II) PCI: 00:10:0: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1043,808c rev 80 class 0c,03,00
hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1043,808c rev 82 class 0c,03,20
hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1043,808c rev 00 class 06,01,00
hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1043,808c rev 06 class 01,01,8a
hdr 00
(II) PCI: 01:00:0: chip 1002,4e48 card 1681,0002 rev 00 class 03,00,00
hdr 80
(II) PCI: 01:00:1: chip 1002,4e68 card 1681,0003 rev 00 class 03,80,00
hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xd6800000 - 0xd7efffff (0x1700000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xefffffff (0x18000000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is
set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) ATI unknown chipset (0x4e48) rev 0, Mem @
0xe8000000/27, 0xd7000000/16, I/O @ 0xd800/8, BIOS @ 0xe7fe0000/17
(--) PCI: (1:0:1) ATI unknown chipset (0x4e68) rev 0, Mem @
0xd8000000/27, 0xd6800000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[1] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[2] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[3] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[4] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[5] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[6] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[8] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[9] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[10] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[11] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[14] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[15] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[16] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[17] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[18] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[19] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[20] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[21] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[22] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[23] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[1] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[2] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[3] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[4] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[5] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[6] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[7] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[8] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[9] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[10] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[11] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[12] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[13] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[14] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[15] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[16] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[17] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[18] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[19] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[20] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[21] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[22] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[23] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[6] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[7] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[8] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[9] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[10] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[11] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[13] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[15] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[16] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[17] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[21] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[23] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[24] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[26] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[27] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[29] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[30] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[31] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.1.10
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:debug_xform.o":
No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.2.0, module version = 2.9.13
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.3
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig
(R9000),
ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO), ATI RV280 Ya
(R9200),
ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
ATI RV350 AR (R9600 PRO), ATI RV350 NP (M10), ATI R300 AD
(R9500),
ATI R300 AE (R9500), ATI R300 AF (R9500),
ATI R300 AG (Fire GL Z1/X1), ATI R300 ND (R9700 PRO),
ATI R300 NE (R9700/R9500 PRO), ATI R300 NF (R9600 TX),
ATI R300 NG (Fire GL X1), ATI R350 AK (Fire GL unknown),
ATI R350 NH (R9800), ATI R350 NK (Fire GL unknown)
(II) Primary Device is: PCI 01:00:0
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1)
found
(--) Chipset ATI R350 NH (R9800) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[6] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[7] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[8] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[9] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[10] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[11] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[13] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[15] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[16] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[17] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[21] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[22] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[23] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[24] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[25] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[26] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[27] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[28] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[29] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[30] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[31] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x081cd650
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[6] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[7] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[8] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[9] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[10] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[11] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[12] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[13] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[14] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[15] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[16] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[17] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[18] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[19] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[20] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[23] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[24] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[25] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[26] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[27] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[28] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[29] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[30] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[31] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[32] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[33] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[34] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [x]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000800"
(**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "0x00000000"
(**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
(**) fglrx(0): Option "HSync2" "unspecified"
(**) fglrx(0): Option "VRefresh2" "unspecified"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "IgnoreEDID" "off"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x00000000
(**) fglrx(0): Gamma Correction for II is 0x00000000
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) fglrx(0): initializing int10
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "ATI R350 NH (R9800)" (Chipset = 0x4e48)
(--) fglrx(0): (PciSubVendor = 0x1681, PciSubDevice = 0x0002)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT
original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xd7000000
(--) fglrx(0): ROM-BIOS at 0xe7fe0000
(--) fglrx(0): ChipRevID = 0x01
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(EE) fglrx(0): board is third party board
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.2.0
ABI class: XFree86 Video Driver, version 0.5
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1,
ConnectorType-2
(II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0,
ConnectorType-3
(**) fglrx(0): MonitorLayout Option:
Monitor1--Type AUTO, Monitor2--Type AUTO
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
Monitor -- NONE
Connector -- DVI-I
DAC Type -- TVDAC/ExtDAC
TMDS Type -- Internal
DDC Type -- DVI_DDC
(II) fglrx(0): Secondary head:
Monitor -- CRT
Connector -- VGA
DAC Type -- Primary
TMDS Type -- NONE
DDC Type -- VGA_DDC
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(**) fglrx(0): Overlay disabled
(II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000;
xclk=33800
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(II) fglrx(0): Monitor0: Using hsync range of 31.00-96.00 kHz
(II) fglrx(0): Monitor0: Using vrefresh range of 55.00-160.00 Hz
(II) fglrx(0): Clock range: 20.00 to 400.00 MHz
(II) fglrx(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1280x1024" 157.50 1280 1344 1504 1728 1024
1025 1028 1072 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769
772 808 +hsync +vsync
(**) fglrx(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600" 56.30 800 832 896 1048 600 601 604
631 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 74.2 MHz, 85.9 kHz, 85.1 Hz (D)
(II) fglrx(0): Modeline "640x480" 74.25 640 672 752 864 480 480 482
505 doublescan +hsync +vsync
(++) fglrx(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.5
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.2.1.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.5
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
compiled for 4.2.0, module version = 2.9.13
ABI class: XFree86 Server Extension, version 0.1
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000800
(**) fglrx(0): cpuFlags: 0x4000000f
(**) fglrx(0): cpuSpeedMHz: 0x0000071e
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xd7000000 - 0xd700ffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xd3000000 - 0xd30000ff (0x100) MX[B]
[8] -1 0 0xd3800000 - 0xd38fffff (0x100000) MX[B]
[9] -1 0 0xd4000000 - 0xd4000fff (0x1000) MX[B]
[10] -1 0 0xd4800000 - 0xd4801fff (0x2000) MX[B]
[11] -1 0 0xd5000000 - 0xd501ffff (0x20000) MX[B]
[12] -1 0 0xd5800000 - 0xd5800fff (0x1000) MX[B]
[13] -1 0 0xd6000000 - 0xd60007ff (0x800) MX[B]
[14] -1 0 0xf0000000 - 0xf7ffffff (0x8000000) MX[B]
[15] -1 0 0xd6800000 - 0xd680ffff (0x10000) MX[B](B)
[16] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[17] -1 0 0xe7fe0000 - 0xe7ffffff (0x20000) MX[B](B)
[18] -1 0 0xd7000000 - 0xd700ffff (0x10000) MX[B](B)
[19] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[20] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[21] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[22] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[23] 0 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[24] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[25] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[26] -1 0 0x00008400 - 0x0000840f (0x10) IX[B]
[27] -1 0 0x00008800 - 0x0000881f (0x20) IX[B]
[28] -1 0 0x00009000 - 0x0000901f (0x20) IX[B]
[29] -1 0 0x00009400 - 0x0000941f (0x20) IX[B]
[30] -1 0 0x00009800 - 0x00009807 (0x8) IX[B]
[31] -1 0 0x0000a000 - 0x0000a01f (0x20) IX[B]
[32] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[B]
[33] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[B]
[34] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[35] -1 0 0x0000b400 - 0x0000b43f (0x40) IX[B]
[36] -1 0 0x0000b800 - 0x0000b87f (0x80) IX[B]
[37] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area: 0xe8700000 (size=0x07900000)
(II) fglrx(0): driver needs XFree86 version: 4.2.x
(II) fglrx(0): detected XFree86 version: 4.2.1
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 1
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 2
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 3
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 4
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 5
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 6
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 7
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 8
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 9
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 10
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 11
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 12
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 13
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 14
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): DRI initialization failed!
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000 Module
called exit() function with value=1
--------------------------------
XF86Config-4
-------------------------------
# File: XF86Config-4
# File generated by fglrxconfig (C) ATI Research, a substitute for
xf86config.
# Note by ATI: the below copyright notice is there for servicing
possibly # pending third party rights on the file format and the
instance of this file. # # Copyright (c) 1999 by The XFree86 Project,
Inc. # # Permission is hereby granted, free of charge, to any person
obtaining a # copy of this software and associated documentation files
(the "Software"), # to deal in the Software without restriction,
including without limitation # the rights to use, copy, modify, merge,
publish, distribute, sublicense, # and/or sell copies of the Software,
and to permit persons to whom the # Software is furnished to do so,
subject to the following conditions: #
# The above copyright notice and this permission notice shall be
included in # all copies or substantial portions of the Software. #
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES
OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR
THE USE OR OTHER DEALINGS IN THE # SOFTWARE. #
# Except as contained in this notice, the name of the XFree86 Project
shall # not be used in advertising or otherwise to promote the sale, use
or other # dealings in this Software without prior written authorization
from the # XFree86 Project. #
# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************
# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection
# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables #
initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA
extension
EndSubSection
# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"
# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a
EndSection
# **********************************************************************
# Files section. This allows default font and rgb paths to be set #
**********************************************************************
Section "Files"
# The location of the RGB database. Note, this is the name of the #
file minus the extension (like ".txt" or ".db"). There is normally # no
need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated
together), # as well as specifying multiple comma-separated entries in
one FontPath # command (or a combination of both methods) #
# If you don't have a floating point coprocessor and emacs, Mosaic or
other # programs take long to start up, try moving the Type1 and Speedo
directory # to the end of this list (or comment them out). #
# FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# **********************************************************************
# Server flags section.
# **********************************************************************
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may #
provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence #
This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With # it
the client can still run and fetch card and monitor attributes, # but it
will not be allowed to change them. If it tries it will # receive a
protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device #
(mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# **********************************************************************
# Input devices
# **********************************************************************
# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************
Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris), #
uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the #
lines below (which are the defaults). For example, for a non-U.S. #
keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# When using XQUEUE, comment out the above two lines, and uncomment #
the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer #
to the XF86Config man page for a description of the options. #
**********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# **********************************************************************
# Monitor section
# **********************************************************************
# Any number of monitor sections may be present
Section "Monitor"
Identifier "Monitor0"
HorizSync 31-96
VertRefresh 55-160
Option "DPMS"
# === mode lines based on GTF ===
# VGA @ 100Hz
# Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync
+vsync # SVGA @ 100Hz # Modeline "800x600@100" 68.179 800 848 936 1072
600 601 604 636 +hsync +vsync # XVGA @ 100Hz # Modeline "1024x768@100"
113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync # 1152x864 @
60Hz # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895
+hsync +vsync # 1152x864 @ 85Hz # Modeline "1152x864@85" 119.651 1152
1224 1352 1552 864 865 868 907 +hsync +vsync # 1152x864 @ 100Hz #
Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915
+hsync +vsync # 1280x960 @ 75Hz # Modeline "1280x960@75" 129.859 1280
1368 1504 1728 960 961 964 1002 +hsync +vsync # 1280x960 @ 100Hz #
Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017
+hsync +vsync # SXGA @ 100Hz # Modeline "1280x1024@100" 190.960 1280
1376 1520 1760 1024 1025 1028 1085 +hsync +vsync # SPEA GDM-1950
(60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
# Modeline "GDM-1950" 109.62 1280 1336 1472 1720 1024 1024 1026 1062
-hsync -vsync # 1600x1000 @ 60Hz # Modeline "1600x1000" 133.142 1600
1704 1872 2144 1000 1001 1004 1035 +hsync +vsync # 1600x1000 @ 75Hz #
Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044
+hsync +vsync # 1600x1000 @ 85Hz # Modeline "1600x1000" 194.202 1600
1712 1888 2176 1000 1001 1004 1050 +hsync +vsync # 1600x1000 @ 100Hz #
Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059
+hsync +vsync # 1600x1024 @ 60Hz # Modeline "1600x1024" 136.385 1600
1704 1872 2144 1024 1027 1030 1060 +hsync +vsync # 1600x1024 @ 75Hz #
Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069
+hsync +vsync # 1600x1024 @ 76Hz # Modeline "1600x1024" 170.450 1600
1632 1792 2096 1024 1027 1030 1070 +hsync +vsync # 1600x1024 @ 85Hz #
Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075
+hsync +vsync # 1920x1080 @ 60Hz # Modeline "1920x1080" 172.798 1920
2040 2248 2576 1080 1081 1084 1118 -hsync -vsync # 1920x1080 @ 75Hz #
Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126
+hsync +vsync # 1920x1200 @ 60Hz # Modeline "1920x1200" 193.156 1920
2048 2256 2592 1200 1201 1203 1242 +hsync +vsync # 1920x1200 @ 75Hz #
Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253
+hsync +vsync # 2048x1536 @ 60 # Modeline "2048x1536" 266.952 2048 2200
2424 2800 1536 1537 1540 1589 +hsync +vsync # 2048x1536 @ 60 # Modeline
"2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync
+vsync # 1400x1050 @ 60Hz M9 Laptop mode
# ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082
+hsync +vsync # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible
display devices # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048
2400 2401 2403 2434 +hsync +vsync # 1920x2400 @ 30Hz for IBM T221, VS
VP2290 and compatible display devices # Modeline "1920x2400@30" 149.250
1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
EndSection
# **********************************************************************
# Graphics device section
# **********************************************************************
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to
override # the driver's chipset detection, and should not normally be
specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver #
module. Even when not using loadable driver modules, this line #
indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices #
this section is intended for. When this line isn't present, a device #
section can only match up with the primary video device. For PCI #
devices a line like the following could be used. This line should not #
normally be included unless there is more than one video device #
installed.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# === ATI device section ===
Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === FireGL DDX driver module specific settings ===
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000800"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "no"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4e48
Screen 0
EndSection
# **********************************************************************
# Screen sections
# **********************************************************************
# Any number of screen sections may be present. Each describes # the
configuration of a single screen. A single specific screen section #
may be specified from the X server command line with the "-screen" #
option. Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"
Subsection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
ViewPort 0 0 # initial origin if mode is smaller than
desktop
# Virtual 1280 1024
EndSubsection
EndSection
# **********************************************************************
# ServerLayout sections.
# **********************************************************************
# Any number of ServerLayout sections may be present. Each describes #
the way multiple screens are organised. A specific ServerLayout #
section may be specified from the X server command line with the #
"-layout" option. In the absence of this, the first section is used. #
When now ServerLayout section is present, the first Screen section # is
used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Server Layout"
# Each Screen line specifies a Screen section name, and optionally # the
relative position of other screens. The four names after # primary
screen name are the screens to the top, bottom, left and right # of the
primary screen.
Screen "Screen0"
# Each InputDevice line specifies an InputDevice section name and #
optionally some options to specify the way the device is to be # used.
Those options include "CorePointer", "CoreKeyboard" and #
"SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
### EOF ###
Reply to: