On Wed, 2003-06-25 at 02:18, David Fokkema wrote: > Hi group, > > I waded through the how-to-burn-knoppix-iso-700Mb-etc thread from a > while back, but could not find anything solid to help me... > > I burned a Knoppix iso on a 700Mb CD-RW on my HP CD-Writer 8100 running > Debian Woody using cdrecord. No problems there... However, when I try to > burn a CD-R, I get medium errors when fixating the drive, :-( > > I tried to burn at 2x speed instead of 4x since my drive can only burn > CD-RWs at 2x, but that didn't help. The writing is fine, the fixating > not. How is this possible? Already wasted three discs with my > 'experiments'... > > BTW: I already used two different brands, however, the speed 2x test was > with only one brand, I'm out of the other one. > > I ran cdrecord -v dev=1,0 speed=2 KNOPPIX_V3.2-2003-06-06-EN.iso. > > TIA, > David > > > Output: > <snipped> > > Track 01: Total bytes read/written: 733317120/733317120 (358065 sectors). > Writing time: 2396.919s > Fixating... > cdrecord: Input/output error. close track/session: scsi sendcmd: no error > CDB: 5B 00 02 00 00 00 00 00 00 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 02 00 00 00 > Sense Key: 0x3 Medium Error, Segment 0 > Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 185.695s timeout 480s > cmd finished after 185.695s timeout 480s > Fixating time: 185.699s > cdrecord: fifo had 11551 puts and 11551 gets. > cdrecord: fifo was 0 times empty and 11475 times full, min fill was 95%. > I had this problem with my yamaha 6x recorder. I has 2 packs of discs that I bought at the same time, one burned fine , the other turned into coasters. I upgraded the firmware (from 1.2 to 1.8) and had no problem since. The upgrade was a windows program and the only windows on my machine was in vmware. I had to create a partition and install win2k on it. It would have been easier to buy a new recorder and if time is money, cheaper too.
Attachment:
signature.asc
Description: This is a digitally signed message part