[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

CD-burning



Hi group,

I waded through the how-to-burn-knoppix-iso-700Mb-etc thread from a
while back, but could not find anything solid to help me...

I burned a Knoppix iso on a 700Mb CD-RW on my HP CD-Writer 8100 running
Debian Woody using cdrecord. No problems there... However, when I try to
burn a CD-R, I get medium errors when fixating the drive, :-(

I tried to burn at 2x speed instead of 4x since my drive can only burn
CD-RWs at 2x, but that didn't help. The writing is fine, the fixating
not. How is this possible? Already wasted three discs with my
'experiments'...

BTW: I already used two different brands, however, the speed 2x test was
with only one brand, I'm out of the other one.

I ran cdrecord -v dev=1,0 speed=2 KNOPPIX_V3.2-2003-06-06-EN.iso.

TIA,
David


Output:

scsidev: '1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.22
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.5'
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 1
Vendor_info    : 'HP      '
Identifikation : 'CD-Writer+ 8100 '
Revision       : '1.0g'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : SWABAUDIO
Drive buf size : 1040128 = 1015 KB
FIFO size      : 4194304 = 4096 KB
Track 01: data  699 MB        
Total size:     803 MB (79:34.22) = 358067 sectors
Lout start:     803 MB (79:36/17) = 358067 sectors
Current Secsize: 2048
  ATIP start of lead in:  -11231 (97:32/19)
  ATIP start of lead out: 359847 (79:59/72)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359847 Blocks current: 359847 Blocks remaining: 1780
Starting to write CD/DVD at speed 2 in write mode for single session.
Last chance to quit, starting real write in 9 seconds.

<snipped countdown>

Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:   0 of 699 MB written.

<snipped write>

Track 01: Total bytes read/written: 733317120/733317120 (358065 sectors).
Writing  time: 2396.919s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB:  5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 12 00 00 00 00 02 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 185.695s timeout 480s
cmd finished after 185.695s timeout 480s
Fixating time:  185.699s
cdrecord: fifo had 11551 puts and 11551 gets.
cdrecord: fifo was 0 times empty and 11475 times full, min fill was 95%.



Reply to: