I'm running Sarge with a custom 2.4.20 kernel. Up until today, my server (Dell Poweredge 600SC) was running one 40Gb drive. Today, I installed a 120Gb in the second IDE slot in the motherboard. I also installed a Maxtor Ultra ATA/133 adapter card (Promise) and attached one Maxtor 120Gb IDE Ultra ATA133 drive to each channel. As the system begins booting, it dies with the following: VFS: Cannot open root device "303" or 03:03 Please append a correct "root=" boot option Kernel panic: VFS: Unable to mount root fs on 03:03 I've searched Google and come up with some vague and sometimes conflicting solutions. If anyone can advise as to what boot option I need to pass, or how to go about determining what to pass, I'd appreciate it. Thanks! -- steve ___________________________________________________ | | | There's a difference between being grumpy and | | hating every little fucker in existence. | | | | http://monticello.biz : technology that works | | http://exitwound.org : hard to find | | http://buckowensfan.com : he's the man | ---------------------------------------------------
Attachment:
signature.asc
Description: This is a digitally signed message part