[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

RE: Ethernet problems: old 3c509b card is having overrun and errors



Sounds more likely to be a hardware problem.  Check cables with a cable
tester and try changing the network card.

These problems aren't normal and a 486/32MB ram configured as a samba server
for a small no of users should be ok.

To answer the question on ethernet card bonding, it's possible to get 4-port
network cards that support bonding.  An example of this is the D-link 570TX.
I've used this before as 4 separate nics, but not in the bonding mode.

I hope this helps,

Colin Ellis
Solution City Ltd
http://www.solution-city.com

-----Original Message-----
From: Calyth [mailto:calyth@shaw.ca]
Sent: 11 March 2003 10:04
To: debian-user@lists.debian.org
Subject: Ethernet problems: old 3c509b card is having overrun and errors


I've been using 3c509b cards before, but it seems that this one, at a
uptime of 8 days, as a samba server, it have encountered 182 errors and
185 overruns upon receiving 838.6 "MiB" (excuse my ignorance, but I
can't recall what MiB means. It has to be something bytes, but what?)
Anyways, I was reading the Ethernet HOWTO, and it suggested me to change
the window size using the route command. According to that HOWTO,
linux's default TCP Rx window is set to 32KB, and I've reset it to half
the size. I'm waiting to see if anything improves.
Has anyone ran into the same problem, and if so did anything you do that
effectively solves it? I'd be glad to hear.
Also, is there a way to use two network cards in this (pretty much
crippled) server so that it would have better "speed", for a lack of a
better term. Again, I'm using it as a Samba server, and neither the HD
nor the network card seems to be fully utilized - the activity lights
are busts - so I don't quite believe that it being a 486 with 32MB of
RAM is truly the problem. I'm aware of ways that software could make
other computers think that two NIC as one, is there anything like that
that I could use in this case?
Thanks in advance.

Calyth


--
To UNSUBSCRIBE, email to debian-user-request@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact
listmaster@lists.debian.org



Reply to: