Hi John!
On Tue, 12 Mar 2002, John Kennedy wrote:
> I have a 56k dialup/firewall box using Debian 2.2.17
>
> I configured the dialup connection using 'ppp-config'
> and selected 'demand' dial
> however after reboot doing 'netstat -nr' returns only
>
> "192.168.1.10 0.0.0.0 255.255.255.0 eth0"
>
> When I ping an address out on the net it won't dial out.
>
> If I type 'pon' and then 'netstat -nr' i get
> a proper routing table as below
>
> "10.112.112.112 0.0.0.0 UH ppp0"
> 192.168.1.0 0.0.0.0 U eth0
> 0.0.0.0 10.112.112.112 UG ppp0
>
> and I can now ping out of my lan to an ip on the net.
>
> Because I an using IRQ-5 on my modem I must also do a
> 'setserial /dev/ttyS3 IRQ 5" before dialing.
take a look at /etc/serial.conf
yours martin
--
<martin@wuertele.net> ------------------------------ NO HTML MAILS PLEASE
PGP/GPG encrypted and signed messages preferred
Attachment:
pgpqRShaxDiDE.pgp
Description: PGP signature