LapTop LCD shifted in X
Hi,
I have been attemting to shift my display down on my laptop. By default,
there is a 1/4 inch of unused display showing at the bottom and the top 1/4
inch is off the top of the screen. This only happens in 800x600 mode. In
fact 640x480 mode shows up in the middle of a 800x600 screen size, I.E.
large border all the way around instead of using the full screen.
Some pertinent info;
Latest Debian stable with all patches
DFI 7200 TC Laptop 32mb memory
...and from X startx ...
(--) SVGA: PCI: Cirrus Logic GD7543 rev 0, Memory @ 0x81000000, 0x80000000
(--) SVGA: clgd7543: LCD display only
(--) SVGA: clgd7543: 800x600 TFT-color (18-bit color) LCD detected
(**) SVGA: chipset: clgd7543
(**) SVGA: videoram: 1024k
(**) SVGA: Using 16 bpp, Depth 16, Color weight: 565
(--) SVGA: Maximum allowed dot-clock: 48.810 MHz
(**) SVGA: Mode "800x600": mode clock = 38.500
(--) SVGA: Virtual Resolution set to 800x600
(--) SVGA: SpeedUp code selection modified because virtualX != 1024
(--) SVGA: clgd7543: Using programmable clocks
(--) SVGA: cldg7543: Internal memory clock register is 0x1e (Extended RAS)
(**) SVGA: clgd7543: Approximate DRAM bandwidth for drawing: 30 of 107 MB/s
(--) SVGA: cldg7543: Using linear framebuffer at 0x81000000 (2064MB)
(--) SVGA: cldg7543: 88576 bytes off-screen memory available
(--) SVGA: cldg7543: Using hardware cursor
(--) SVGA: cldg7543: Using accelerator functions
(--) SVGA: cldg7543: Using BitBLT engine
I've tried using xvidtune, but it doesn't seem to change my screen at all.
So, I need some new suggestions.
Thanks,
Patrick
Reply to: