Realtek module don't want to be loaded! Is too busy... ;)
Hi there,
I'm having problems on getting my pcmcia card to work on Debian.
Already compiled RTL8139 as module from kernel and installed pcmcia-cs
tarball.
In my opinion, problem is from rtl8139 module:
$ insmod rtl8139
/lib/modules/2.2.14/net/rtl8139.o: init_module: Device or resource busy
On linux boot I'm able to hear high and low tones so it seems the card
is detected.
I'd also copied
/lib/modules/2.2.14/net/rtl8139.o
to
/lib/modules/2.2.14/pcmcia/realtek_cb.o
Where's the problem ?
Thanks in advance.
Best regards,
Nuno Carvalho
PS: Please reply to me since I'm not subscribed on this mailing list.
***********
Additional info:
- Debian distribution: 2.1
- Linux Kernel: 2.2.14 (from tarball file)
- PCMCIA Card Services: 3.1.16 (from tarball)
- Compaq Presario 1200 laptop with a Conceptronic Realtek 8139 chipset
PCMCIA Card
$ lsmod
Module Size Used by
cb_enabler 2236 0 (unused)
ds 6640 1 [cb_enabler]
i82365 22956 1
pcmcia_core 45320 0 [cb_enabler ds i82365]
$ cardctl config
Socket 0:
Vcc 3.3V Vpp1 3.3V Vpp2 3.3V
interface type is "cardbus"
function 0:
$ cardctl ident
Socket 0:
product info: "PCMCIA", "CardBus Ethernet 10/100 (R5)"
manfid: 0x0260, 0x0235
function: 6 (network)
$ cardctl status
Socket 0:
3.3V CardBus card
function 0: [ready]
$ dmesg
[...]
Linux PCMCIA Card Services 3.1.16
kernel build: 2.2.14 #2 Fri Nov 16 20:17:13 WET 2001
options: [pci] [cardbus]
PCI routing table version 1.0 at 0xfdf70
Intel PCIC probe:
TI 1211 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x68000000
host opts [0]: [ring] [pci + serial irq] [pci irq 9] [lat 32/176] [bus
32/34]
ISA irqs (scanned) = 3 PCI status changes
cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f
0x388-0x38f 0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138
[/var/log/messages]
Nov 20 15:11:53 morpheus kernel: Linux PCMCIA Card Services 3.1.16
Nov 20 15:11:53 morpheus kernel: kernel build: 2.2.14 #2 Fri Nov 16
20:17:13 WET 2001
Nov 20 15:11:53 morpheus kernel: options: [pci] [cardbus]
Nov 20 15:11:53 morpheus kernel: PCI routing table version 1.0 at 0xfdf70
Nov 20 15:11:53 morpheus kernel: Intel PCIC probe:
Nov 20 15:11:53 morpheus kernel: TI 1211 rev 00 PCI-to-CardBus at slot
00:0a, mem 0x68000000
Nov 20 15:11:53 morpheus kernel: host opts [0]: [ring] [pci + serial
irq] [pci irq 9] [lat 32/176] [bus 32/34]
Nov 20 15:11:53 morpheus kernel: ISA irqs (scanned) = 3 PCI status
changes
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x1000-0x17ff:
excluding 0x1000-0x10ff 0x1400-0x14ff
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0100-0x04ff:
excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Nov 20 15:11:54 morpheus kernel: cs: cb_alloc(bus 32): vendor 0x10ec,
device 0x8138
[/var/log/syslog]
Nov 20 15:11:53 morpheus kernel: Linux PCMCIA Card Services 3.1.16
Nov 20 15:11:53 morpheus kernel: kernel build: 2.2.14 #2 Fri Nov 16
20:17:13 WET 2001
Nov 20 15:11:53 morpheus kernel: options: [pci] [cardbus]
Nov 20 15:11:53 morpheus kernel: PCI routing table version 1.0 at 0xfdf70
Nov 20 15:11:53 morpheus kernel: Intel PCIC probe:
Nov 20 15:11:53 morpheus kernel: TI 1211 rev 00 PCI-to-CardBus at slot
00:0a, mem 0x68000000
Nov 20 15:11:53 morpheus kernel: host opts [0]: [ring] [pci + serial
irq] [pci irq 9] [lat 32/176] [bus 32/34]
Nov 20 15:11:53 morpheus kernel: ISA irqs (scanned) = 3 PCI status
changes
Nov 20 15:11:53 morpheus cardmgr[91]: starting, version is 3.1.16
Nov 20 15:11:54 morpheus cardmgr[91]: watching 1 sockets
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x1000-0x17ff:
excluding 0x1000-0x10ff 0x1400-0x14ff
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0100-0x04ff:
excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0a00-0x0aff: clean.
Nov 20 15:11:54 morpheus kernel: cs: cb_alloc(bus 32): vendor 0x10ec,
device 0x8138
Nov 20 15:11:54 morpheus cardmgr[91]: initializing socket 0
Nov 20 15:11:54 morpheus cardmgr[91]: socket 0: 32-bit CardBus Ethernet
10/100 (R5)
Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'modprobe cb_enabler'
Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'modprobe realtek_cb'
Nov 20 15:11:54 morpheus cardmgr[91]: +
/lib/modules/2.2.14/pcmcia/realtek_cb.o: init_module: Device or resource
busy
Nov 20 15:11:54 morpheus cardmgr[91]: modprobe exited with status 1
Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'insmod
/lib/modules/2.2.14/pcmcia/realtek_cb.o'
Nov 20 15:11:54 morpheus cardmgr[91]: +
/lib/modules/2.2.14/pcmcia/realtek_cb.o: init_module: Device or resource
busy
Nov 20 15:11:54 morpheus cardmgr[91]: insmod exited with status 1
Nov 20 15:11:55 morpheus cardmgr[91]: get dev info on socket 0 failed:
Resource temporarily unavailable
Reply to: