[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Realtek module don't want to be loaded! Is too busy... ;)



well, try to see if the module is already loaded

cat /proc/modules gives a list of all modules loaded.
If you have an entry in here then all you have to do is ifconfig


On Wed, 21 Nov 2001, Nuno Emanuel F. Carvalho wrote:

> Hi there,
> 
>   I'm having problems on getting my pcmcia card to work on Debian.
>   Already compiled RTL8139 as module from kernel and installed pcmcia-cs
> tarball.
>   In my opinion, problem is from rtl8139 module:
> 
>   $ insmod rtl8139
> /lib/modules/2.2.14/net/rtl8139.o: init_module: Device or resource busy
> 
>   On linux boot I'm able to hear high and low tones so it seems the card
> is detected.
> 
>   I'd also copied
> /lib/modules/2.2.14/net/rtl8139.o
> to
> /lib/modules/2.2.14/pcmcia/realtek_cb.o
> 
>   Where's the problem ?
> 
>   Thanks in advance.
> 
>   Best regards,
>      Nuno Carvalho
> 
> PS: Please reply to me since I'm not subscribed on this mailing list.
> 
> ***********
> Additional info:
> 
> - Debian distribution: 2.1
> - Linux Kernel: 2.2.14 (from tarball file)
> - PCMCIA Card Services: 3.1.16 (from tarball)
> - Compaq Presario 1200 laptop with a Conceptronic Realtek 8139 chipset
> PCMCIA Card
> 
> $ lsmod
> Module                  Size  Used by
> cb_enabler              2236   0  (unused)
> ds                      6640   1  [cb_enabler]
> i82365                 22956   1
> pcmcia_core            45320   0  [cb_enabler ds i82365]
> 
> $ cardctl config
> Socket 0:
>   Vcc 3.3V  Vpp1 3.3V  Vpp2 3.3V
>   interface type is "cardbus"
>   function 0:
> 
> $ cardctl ident
> Socket 0:
>   product info: "PCMCIA", "CardBus Ethernet 10/100 (R5)"
>   manfid: 0x0260, 0x0235
>   function: 6 (network)
> 
> $ cardctl status
> Socket 0:
>   3.3V CardBus card
>   function 0: [ready]
> 
> $ dmesg
> [...]
> Linux PCMCIA Card Services 3.1.16
>   kernel build: 2.2.14 #2 Fri Nov 16 20:17:13 WET 2001
>   options:  [pci] [cardbus]
> PCI routing table version 1.0 at 0xfdf70
> Intel PCIC probe:
>   TI 1211 rev 00 PCI-to-CardBus at slot 00:0a, mem 0x68000000
>     host opts [0]: [ring] [pci + serial irq] [pci irq 9] [lat 32/176] [bus
> 32/34]
>     ISA irqs (scanned) = 3 PCI status changes
> cs: IO port probe 0x1000-0x17ff: excluding 0x1000-0x10ff 0x1400-0x14ff
> cs: IO port probe 0x0100-0x04ff: excluding 0x220-0x22f 0x378-0x37f
> 0x388-0x38f 0x4d0-0x4d7
> cs: IO port probe 0x0a00-0x0aff: clean.
> cs: cb_alloc(bus 32): vendor 0x10ec, device 0x8138
> 
> [/var/log/messages]
> Nov 20 15:11:53 morpheus kernel: Linux PCMCIA Card Services 3.1.16
> Nov 20 15:11:53 morpheus kernel:   kernel build: 2.2.14 #2 Fri Nov 16
> 20:17:13 WET 2001
> Nov 20 15:11:53 morpheus kernel:   options:  [pci] [cardbus]
> Nov 20 15:11:53 morpheus kernel: PCI routing table version 1.0 at 0xfdf70
> Nov 20 15:11:53 morpheus kernel: Intel PCIC probe:
> Nov 20 15:11:53 morpheus kernel:   TI 1211 rev 00 PCI-to-CardBus at slot
> 00:0a, mem 0x68000000
> Nov 20 15:11:53 morpheus kernel:     host opts [0]: [ring] [pci + serial
> irq] [pci irq 9] [lat 32/176] [bus 32/34]
> Nov 20 15:11:53 morpheus kernel:     ISA irqs (scanned) = 3 PCI status
> changes
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x1000-0x17ff:
> excluding 0x1000-0x10ff 0x1400-0x14ff
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0100-0x04ff:
> excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Nov 20 15:11:54 morpheus kernel: cs: cb_alloc(bus 32): vendor 0x10ec,
> device 0x8138
> 
> [/var/log/syslog]
> Nov 20 15:11:53 morpheus kernel: Linux PCMCIA Card Services 3.1.16
> Nov 20 15:11:53 morpheus kernel:   kernel build: 2.2.14 #2 Fri Nov 16
> 20:17:13 WET 2001
> Nov 20 15:11:53 morpheus kernel:   options:  [pci] [cardbus]
> Nov 20 15:11:53 morpheus kernel: PCI routing table version 1.0 at 0xfdf70
> Nov 20 15:11:53 morpheus kernel: Intel PCIC probe:
> Nov 20 15:11:53 morpheus kernel:   TI 1211 rev 00 PCI-to-CardBus at slot
> 00:0a, mem 0x68000000
> Nov 20 15:11:53 morpheus kernel:     host opts [0]: [ring] [pci + serial
> irq] [pci irq 9] [lat 32/176] [bus 32/34]
> Nov 20 15:11:53 morpheus kernel:     ISA irqs (scanned) = 3 PCI status
> changes
> Nov 20 15:11:53 morpheus cardmgr[91]: starting, version is 3.1.16
> Nov 20 15:11:54 morpheus cardmgr[91]: watching 1 sockets
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x1000-0x17ff:
> excluding 0x1000-0x10ff 0x1400-0x14ff
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0100-0x04ff:
> excluding 0x220-0x22f 0x378-0x37f 0x388-0x38f 0x4d0-0x4d7
> Nov 20 15:11:54 morpheus kernel: cs: IO port probe 0x0a00-0x0aff: clean.
> Nov 20 15:11:54 morpheus kernel: cs: cb_alloc(bus 32): vendor 0x10ec,
> device 0x8138
> Nov 20 15:11:54 morpheus cardmgr[91]: initializing socket 0
> Nov 20 15:11:54 morpheus cardmgr[91]: socket 0: 32-bit CardBus Ethernet
> 10/100 (R5)
> Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'modprobe cb_enabler'
> Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'modprobe realtek_cb'
> Nov 20 15:11:54 morpheus cardmgr[91]: +
> /lib/modules/2.2.14/pcmcia/realtek_cb.o: init_module: Device or resource
> busy
> Nov 20 15:11:54 morpheus cardmgr[91]: modprobe exited with status 1
> Nov 20 15:11:54 morpheus cardmgr[91]: executing: 'insmod
> /lib/modules/2.2.14/pcmcia/realtek_cb.o'
> Nov 20 15:11:54 morpheus cardmgr[91]: +
> /lib/modules/2.2.14/pcmcia/realtek_cb.o: init_module: Device or resource
> busy
> Nov 20 15:11:54 morpheus cardmgr[91]: insmod exited with status 1
> Nov 20 15:11:55 morpheus cardmgr[91]: get dev info on socket 0 failed:
> Resource temporarily unavailable
> 
> 
> 
> -- 
> To UNSUBSCRIBE, email to debian-user-request@lists.debian.org 
> with a subject of "unsubscribe". Trouble? Contact listmaster@lists.debian.org
> 
> 



Reply to: