CIPE in debian 2.2 - a few problems
Hi All,
I use the CIPE encrypted channel to establish communication between my two
separated intranet subnets. The cipcb daemon is loaded with following options
in modules.conf:
### update-modules: start processing /etc/modutils/cipe
alias cipcb0 cipcb
alias cipcb1 cipcb
alias cipci0 cipci
alias cipci1 cipci
options cipcb cipe_maxdev=2 cipe_debug=0
These settings should switch the debugging off (and in fact I get the
following loading confirmation in my kern.log:
"Nov 12 00:38:19 wzab kernel: cipcb: CIPE driver vers 1.5.2 (c) Olaf Titz
1996-2000, 2 channels, debug=0"), but anyway I get the following messages
in my log files: (IP numbers are changed due to security reasons)
Nov 12 01:29:57 wzab kernel: PROTO=17 aaa.bbb.ccc.ddd:1234 111.222.333.444:9876
L=108 S=0x00 I=58291 F=0x4000 T=64
Nov 12 01:29:57 wzab kernel: nf_hook: hook 4 already set.
Nov 12 01:29:57 wzab kernel: skb: pf=2 (owned) dev=eth1 len=100
Nov 12 01:29:57 wzab kernel: PROTO=17 aaa.bbb.ccc.ddd:1234 111.222.333.444:9876
L=100 S=0x00 I=58292 F=0x4000 T=64
Nov 12 01:29:57 wzab kernel: nf_hook: hook 4 already set.
Nov 12 01:29:57 wzab kernel: skb: pf=2 (owned) dev=eth1 len=100
Nov 12 01:29:57 wzab kernel: PROTO=17 aaa.bbb.ccc.ddd:1234 111.222.333.444:9876
L=100 S=0x00 I=58293 F=0x4000 T=64
I don't know how to switch off these annoying messages which overflow my
logs...
--
TIA & Regards,
Wojciech M. Zabolotny
http://www.ise.pw.edu.pl/~wzab <--> wzab@ise.pw.edu.pl
If the dynamic growth is a sign of health, then a cancer is the
healthiest part of the body.
Reply to: