Re: DHCP Servr configuration
On Sat, 2001-11-10 at 23:21, Osamu Aoki wrote:
> I do this dhcp server for home LAN system on gateway machine. eth0 for
> cable connection and eth1 for LAN side.
>
> On Sat, Nov 10, 2001 at 10:56:01PM +0100, Eric Smith wrote:
> > Would like to have the bare minimum config for a single networked
> > (windows) machine which I want to give internet access to from my
> > debian server.
Seems to me that what you are looking for is not DHCP but NAT.
1) Configure your second eth card to 192.168.0.1.
2) Activate nat on your gnu/linux box
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
(on a 2.4 kernel)
eth0 is my external(cable modem) interface, for you it could be pppx for
a modem.
3)On the MS machine use a 192.168.0.xx IP and define 192.168.0.1 as your
gateway. You are set.
On a 2.2 kernel it is similar and even easier: install the ipmasq
package,
Michel.
Reply to: