Re: Sound: DMA (output) timed out - IRQ/DRQ config error?
Waldemar,
Thanks for your reply.
Waldemar Brodkorb <waldemar.brodkorb@web.de> writes:
> Hello Johann,
>
> * Johann wrote:
>
> > I get the error in the subject line when I try to run mp3blaster on a
> > mp3-file. I have tried xmms, alsaplayer and freeamp and they also
> > fail.
> >
> > I can play CD's without a problem. How can I find out what the
> > problem is and how to solve it?
>
> Your soundcard is not configured.
If this is true, I don't understand why I get good quality sound using
gcd and gmix.
CS4232 or maybe CS4236
> What soundcard you use and which driver you try?
> (ALSA or OSS)
I tried the kernel's sound module
CONFIG_SOUND_CS4232=m
And then also Alsa. The default Alsa configuration did not change
anything.
I had it working before, but after replacing my motherboard it stopped
working.
> lspci -v
lspci -v
00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev 44)
Subsystem: Giga-byte Technology: Unknown device 0691
Flags: bus master, medium devsel, latency 16
Memory at d8000000 (32-bit, prefetchable)
Capabilities: <available only to root>
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3 AGP]
(prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Capabilities: <available only to root>
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Apollo PRO] (rev 23)
Subsystem: Giga-byte Technology: Unknown device 0596
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586 IDE [Apollo]
(rev 10) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at e000
Capabilities: <available only to root>
00:07.3 Host bridge: VIA Technologies, Inc.: Unknown device 3050 (rev 30)
Flags: medium devsel
00:09.0 VGA compatible controller: S3 Inc. 86c764/765 [Trio32/64/64V+]
(prog-if 00 [VGA])
Flags: medium devsel, IRQ 11
Memory at dd000000 (32-bit, non-prefetchable)
> cat /proc/interrupts
CPU0
0: 3844909 XT-PIC timer
1: 30343 XT-PIC keyboard
2: 0 XT-PIC cascade
9: 0 XT-PIC Crystal audio controller
12: 494169 XT-PIC PS/2 Mouse
13: 1 XT-PIC fpu
14: 304868 XT-PIC ide0
15: 1095601 XT-PIC ide1
NMI: 0
ERR: 0
> cat /proc/dma
0: Crystal audio controller
3: Crystal audio controller
4: cascade
> lsmod
Module Size Used by
ppp_deflate 39392 0 (autoclean)
bsd_comp 3880 0 (autoclean)
loop 7712 8 (autoclean)
parport_probe 3320 0
lp 4568 0
cs4232 2640 2
ad1848 15984 2 [cs4232]
uart401 6160 2 [cs4232]
serial 19028 1
sound 58144 0 [cs4232 ad1848 uart401]
parport_pc 7320 2
nls_iso8859-1 2368 0 (unused)
nls_cp437 3872 5
vfat 9084 1
fat 29760 1 [vfat]
I suppose I have to change the DMA- and IRQ-setting, but to what? How
do I determine that?
Johann
--
J.H. Spies - Tel. 082 782 0336. Posbus 4668, Tygervallei 7536
"Study to show thyself approved unto God, a workman
who does not need to be ashamed and who correctly
handles the word of truth." II Timothy 2:15
Reply to: