Re: HP 9100 series cd -writer?
virtanen wrote:
> Didn't find any clue yet, what to do.
> Still nothing happens.
> For most of the time 'xcdroast' command is
> answering:
>
> 'No Generic SCSI-Support has been detected.'
> (Anyway there are the modules sg and ide-sci emulation installed.)
>
> >From dmesg:
> ___________
>
> hdc: Hewlett-Packard CD-Writer Plus 9100b, ATAPI CDROM drive
> hdd: CD-ROM 48X/AKU, ATAPI CDROM drive
>
> /etc/modules is as follows:
>
> eepro100
> 3c59x
> 3c59x
> parport
> parport_pc
> parport_probe
> sg
> ide-scsi
Make sure you also have module sr_mod (for scsi cdrom) and that scsi
support is set with CONGIG_SCSI.
Then to make sure the scsi modules are loaded in the right order and
see your CD-RW add the following in /etc/modutils/aliases
options ide-cd ignore=hdc # tell the ide-cd module to ignore hdc
alias scd0 sr_mod # load sr_mod upon access of scd0
pre-install sg modprobe ide-scsi # load ide-scsi before sg
pre-install sr_mod modprobe ide-scsi # load ide-scsi before sr_mod
pre-install ide-scsi modprobe ide-cd # load ide-cd before ide-scsi
Then run update-modules that's all. Then remove sg and ide-scsi from
/etc/modules.Then as root run cdrecord -scanbus to see the CD-RW as a scsi
device.
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reply to: