Re: Help! Wrecking my system trying to get sound
"Eric G . Miller" wrote:
>
> I don't know. Maybe it'll show up as an ISAPNP device (mine shows up
> under both, though only the controller shows up as a PCI device). These
> on board things are a little weird. Try pnpdump.
Here is the output of pnpdump. It is kinda long, but no mention of a
CS4236 anywhere. I'd turn off the stupid onboard sound and just stick
in a spare Sounblaster AWE64, but the kids machine upstairs has the same
video and sound setup (ATI Rage Pro and CS4236) so I'd like to get it
hammered out here before I convert his box from RH 6.2 to Debian 2.2r2.
Still downloading the kernel...
Monte
# $Id: pnpdump.c,v 1.21 1999/12/09 22:28:33 fox Exp $
# Release isapnptools-1.21 (library isapnptools-1.21)
#
# This is free software, see the sources for details.
# This software has NO WARRANTY, use at your OWN RISK
#
# For details of the output file format, see isapnp.conf(5)
#
# For latest information and FAQ on isapnp and pnpdump see:
# http://www.roestock.demon.co.uk/isapnptools/
#
# Compiler flags: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR
# (for library: -DREALTIME -DNEEDSETSCHEDULER -DABORT_ONRESERR)
#
# Trying port address 0273
# Board 1 has serial identifier b6 ff ff ff ff 35 68 63 0e
# (DEBUG)
(READPORT 0x0273)
(ISOLATE PRESERVE)
(IDENTIFY *)
(VERBOSITY 2)
(CONFLICT (IO FATAL)(IRQ FATAL)(DMA FATAL)(MEM FATAL)) # or WARNING
# Card 1: (serial identifier b6 ff ff ff ff 35 68 63 0e)
# Vendor Id CSC6835, No Serial Number (-1), checksum 0xB6.
# Version 1.0, Vendor version 0.1
# ANSI string -->CS4236B<--
#
# Logical device id CSC0000
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be
changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CSC6835/-1 (LD 0
# ANSI string -->WSS/SB<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# First DMA channel 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed type A
# (DMA 0 (CHANNEL 1))
# Next DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed type A
# (DMA 1 (CHANNEL 0))
# IRQ 5, 7 or 9.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0534
# Maximum IO base address 0x0608
# IO base alignment 212 bytes
# Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0534))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x0388
# IO base alignment 8 bytes
# Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0240
# IO base alignment 32 bytes
# Number of IO addresses required: 16
# (IO 2 (SIZE 16) (BASE 0x0220))
# Start dependent functions: priority acceptable
# First DMA channel 0, 1 or 3.
# 8 bit DMA only
# Logical device is a bus master
# DMA may execute in count by byte mode
# DMA may not execute in count by word mode
# DMA channel speed type A
# (DMA 0 (CHANNEL 0))
# IRQ 5, 7, 9, 11, 12 or 15.
# High true, edge sensitive interrupt (by default)
# (INT 0 (IRQ 5 (MODE +E)))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0534
# Maximum IO base address 0x0ffc
# IO base alignment 4 bytes
# Number of IO addresses required: 4
# (IO 0 (SIZE 4) (BASE 0x0534))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0388
# Maximum IO base address 0x03f0
# IO base alignment 8 bytes
# Number of IO addresses required: 4
# (IO 1 (SIZE 4) (BASE 0x0388))
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0220
# Maximum IO base address 0x0260
# IO base alignment 16 bytes
# Number of IO addresses required: 16
# (IO 2 (SIZE 16) (BASE 0x0220))
# End dependent functions
(NAME "CSC6835/-1[0]{WSS/SB }")
# (ACT Y)
))
#
# Logical device id CSC000f
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be
changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CSC6835/-1 (LD 1
# ANSI string -->Game<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x03a0
# Maximum IO base address 0x03f8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x03a0))
# End dependent functions
(NAME "CSC6835/-1[1]{Game }")
# (ACT Y)
))
#
# Logical device id CSC0010
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be
changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CSC6835/-1 (LD 2
# ANSI string -->Ctrl<--
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0f00
# Maximum IO base address 0x0fe8
# IO base alignment 8 bytes
# Number of IO addresses required: 8
# (IO 0 (SIZE 8) (BASE 0x0f00))
(NAME "CSC6835/-1[2]{Ctrl }")
# (ACT Y)
))
#
# Logical device id CSC0003
# Device supports vendor reserved register @ 0x3b
# Device supports vendor reserved register @ 0x3c
# Device supports vendor reserved register @ 0x3e
# Device supports vendor reserved register @ 0x3f
#
# Edit the entries below to uncomment out the configuration required.
# Note that only the first value of any range is given, this may be
changed if required
# Don't forget to uncomment the activate (ACT Y) when happy
(CONFIGURE CSC6835/-1 (LD 3
# ANSI string -->MPU<--
# Multiple choice time, choose one only !
# Start dependent functions: priority preferred
# Logical device decodes 16 bit IO address lines
# Minimum IO base address 0x0330
# Maximum IO base address 0x03f0
# IO base alignment 8 bytes
# Number of IO addresses required: 2
# (IO 0 (SIZE 2) (BASE 0x0330))
# End dependent functions
(NAME "CSC6835/-1[3]{MPU }")
# (ACT Y)
))
# End tag... Checksum 0x00 (OK)
# Returns all cards to the "Wait for Key" state
(WAITFORKEY)
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: