Re: Help! Wrecking my system trying to get sound
"Eric G . Miller" wrote:
>
> Yea I'd grab a copy of 2.2.18 from ftp.kernel.org (or suitable mirror)
> and try the cs4226 module (I recall it showed up in 2.2.17 and is for
> these newer mobo/soundcard jobs). You still probably want to try lspci
> to get I/O, IRQ and DMA parameters. It's easier to test different
> parameters if you compile as a module. To make it easier, you might
> compile sound support directly into the kernel, but just make the cs4236
> module separate. Then maybe something like:
>
> $ insmod cs4236 io=0x534 irq=5 dma=1,0
>
> Check the documentation in <kernel>/Documentation/sound for some hints.
> Unfortunately, there doesn't seem to be any info on this module
> specifically.
>
> The best source for the module parameters would be the MoBo
> documentation (but I'm sure Dell didn't provide it...).
Umm... this is making me nervous... lspci shows my NIC and my video
adapter (both onboard) but not the sound. Any ideas?
ishamael:/home/monte# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
(rev 03)
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
00:0f.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
00:11.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 24)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP
1X/2X (rev 5c)
Monte
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Reply to: