[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Adapted AHA1542 Problems.

At 11:11 2000/08/03 -0600, you wrote:
On Thu, Aug 03, 2000 at 10:53:41AM -0400, Adam Scriven wrote:
> So, I tried to fix that with a boot parameter, "aha1542=0x130", but that
> doesn't seem to have done anything either.

each time i re-install windows on the box (every 6 months, tops), it fscks the pnp info on every card, so i sometimes have to set my card on pnp or manual config. when this happens, changing the io address fixes the "device or resource busy" problem. if you can, you may want to try changing the card io address and passing the new value to the module. not the nicest solution, but has worked for me before.

Hrm...the only thing is, I haven't used the card in quite a long time, not in a windows box or anything...for like 6 months.

I'll give it a try, tho (Of course, I just pushed the server back into it's "spot", so I've gotta pull the d@mn thing out again. 8-)

Toronto, Ontario, Canada

Reply to: