> Should it? My machines running 2.0.36 are all printing on /dev/lp1 > and that's to LPT1 and 0x378. I'm not sure why you're using 0x278 > in the BIOS (conventionally LPT2). I changed it to 0x378 and said modprobe lp io=0x378 The device is still /dev/lp0. lp1 and lp2 are still not configured, and tunelp still gives the same output. So I guess it does not matter whether 0x278 or 0x378 is used. Unfortunately. Stef