Re: Compaq Presario 1245 Touchpad interface problems
On Thu, 8 Jul 1999, Dale Scheetz wrote:
> I just got the new laptop, and have been quite satisfied with it, except
> when it comes to X...
>
> The primary problem is that I must configure X for a serial mouse, because
> I don't know what device and port to pick for the touchpad. Am I out of
> luck, or is there a working choice available in XF86Setup?
if its the synaptics touch pad just treat it as a ps/2 mouse and X should
treat it fine.... (i have the pres 1680, so i'm assuming a few things
here;))
>
> While I'm at it, does anyone know how to get the graphics card into any
> other mode but the "super low res"? I can only see about 10% of the
> screen, and I can't scroll. Is this also the best I can do?
once again i'm making an assupmtion that your pres has a version of the
neomagic video card found in most of the compaq laptop products so here
is my config file where i can get as decent a resolution as possible ( i
forget the website that had the initial work on it)
let me know how it works out....
regards,
jd?
>
> Please CC me, as I am not subscribed to this list.
>
> TIA,
>
> Dwarf
> --
> _-_-_-_-_- Author of "The Debian Linux User's Guide" _-_-_-_-_-_-
>
> aka Dale Scheetz Phone: 1 (850) 656-9769
> Flexible Software 11000 McCrackin Road
> e-mail: dwarf@polaris.net Tallahassee, FL 32308
>
> _-_-_-_-_-_- See www.linuxpress.com for more details _-_-_-_-_-_-_-
>
>
> --
> Unsubscribe? mail -s unsubscribe debian-user-request@lists.debian.org < /dev/null
>
Xconfig file follows
================
Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath
"/usr/X11R6/lib/X11/fonts/misc/" FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath
"/usr/X11R6/lib/X11/fonts/Type1/" FontPath
"/usr/X11R6/lib/X11/fonts/Speedo/" FontPath
"/usr/X11R6/lib/X11/fonts/75dpi/" FontPath
"/usr/X11R6/lib/X11/fonts/100dpi/"# ModulePath
"/usr/X11R6/lib/modules"EndSection#Section "Module"# Load
"xf86Jstk.so"#EndSectionSection "ServerFlags"# NoTrapSignals#
DontZap# DontZoom# DisableVidModeExtension#
AllowNonLocalXvidtune# DisableModInDev#
AllowNonLocalModInDevEndSectionSection "Keyboard" Protocol "Standard"
AutoRepeat 500 5 XkbDisable XkbKeymap
"xfree86(us)"EndSectionSection "Pointer"# Protocol "Microsoft"#
Device "/dev/ttyS0" Protocol "PS/2" Device "/dev/psaux"
Emulate3Buttons Emulate3Timeout 50EndSectionSection "Monitor"
Identifier "Generic Multisync" VendorName "Unknown" ModelName
"Unknown" HorizSync 30-64 VertRefresh 50-100# 640x480 @ 60 Hz,
31.5 kHz hsyncModeline "640x480" 25.175 640 664 760 800 480 491
493 525# 800x600 @ 60 Hz, 37.8 kHz hsyncModeline "800x600" 40 800
840 968 1056 600 601 605 628 +hsync +vsync# 1024x768 @ 60 Hz, 48.4
kHz hsyncModeline "1024x768" 65 1024 1032 1176 1344 768 771 777
806 -hsync -vsyncEndSectionSection "Device" Identifier
"NeoMagic"# Chipset "NM2160"# IOBase 0xfea00000# MemBase
0xfd000000 VideoRam 2048# DacSpeed 90# Option "linear"#
Option "nolinear"# Option "sw_cursor"# Option "hw_cursor"#
Option "no_accel"# Option "intern_disp"# Option
"extern_disp"# Option "mmio"# Option "no_mmio"#
Option "lcd_center"# Option "no_stretch"EndSectionSection "Screen"
Driver "svga" Device "NeoMagic" Monitor "Generic
Multisync" Subsection "Display" Depth 24 Modes
"800x600" "640x480" virtual 1024 768 EndSubsection Subsection
"Display" Depth 16 Modes "1024x768" "800x600"
"640x480" virtual 1024 768 EndSubsection Subsection "Display"
Depth 8 Modes "1024x768" "800x600" "640x480" virtual
1024 768 EndSubsectionEndSection
Reply to: