Re: 2 network cards revisited

[MR <matt@ccdweb.com>]

>> /etc/lilo.conf now looks like:
>> 
>> boot=/dev/hda1
>> root=/dev/hda1
>> install=/boot/boot.b
>> map=/boot/map
>> vga=normal
>> delay=20
>> image=/vmlinuz
>>         label=Linux
>>         read-only
>> append="ether=11,0x300,eth0 ether=10,0x240,eth1"
>> 
>> ran liloconfig and let it install a boot block using the current lilo
config.
>> 
>> rebooted.. and only 1 card is picked up (looks like nothing changed)
>> 
>> -Matt
>
>Make your append entry the first line. I am using two NIC's in this way.
>You might also try being more ambiguous and let the kernel find the
>addresses on its own. My lilo.conf looks like this:
>
>append = "ether=0,0,eth1"
>boot=/dev/hda1
>root=/dev/hda1
>install=/boot/boot.b
>map=/boot/map
>vga=normal
>delay=50
>image=/vmlinuz
>label=Linux
>read-only
>
>
>
>#safety net - this is a known working kernel
>image=/vmlinuz.safe
>label=safe
>root=/dev/hda1
>vga=normal
>


I moved my append line to the top and tried yours also and it still does
not pick up the second card. I know the card works as it was pulled from
another system so it shouldn't be the hardware. 

Matt
matt@ccdweb.com
--
Any sufficiently advanced form of technology is indistinguishable from magic.