[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

xisp_2.5p2-2.deb doesn't run pppd. pon does.



I can't get xisp_2.5p2-2.deb to work. And this is contrary to the fact that 
pon/poff work almost without intervention (I had only to add noauth to get it 
to work).
I believe that he problem with xisp is something to do with getting pppd to 
work. I tried to change various flags in /etc/ppp/option.xisp, but it didn't 
help.
Here are some typical log:

	A typical log for pon is:
	=========================
Aug 30 09:33:39 rakefet pppd[11043]: pppd 2.3.5 started by shaul, uid 1000
Aug 30 09:33:41 rakefet chat[11044]: abort on (BUSY)
Aug 30 09:33:41 rakefet chat[11044]: abort on (NO CARRIER)
	. . .
Aug 30 09:33:58 rakefet pppd[11043]: Serial connection established.
Aug 30 09:33:59 rakefet pppd[11043]: Using interface ppp0
Aug 30 09:33:59 rakefet pppd[11043]: Connect: ppp0 <--> /dev/ttyS1
Aug 30 09:34:02 rakefet pppd[11043]: local  IP address 192.117.188.85
Aug 30 09:34:02 rakefet pppd[11043]: remote IP address 192.117.188.7

	A typical log for xisp:
	=======================
Aug 30 09:53:41 rakefet pppd[11100]: pppd 2.3.5 started by shaul, uid 1000
Aug 30 09:54:05 rakefet pppd[11100]: Serial connection established.
Aug 30 09:54:06 rakefet pppd[11100]: Using interface ppp0
Aug 30 09:54:06 rakefet pppd[11100]: Connect: ppp0 <--> /dev/ttyS1
Aug 30 09:54:38 rakefet pppd[11100]: Terminating on signal 2.


I tried to uncomment the debug option in /etc/ppp/options.xisp, but it didn't 
revealed much. And I couldn't figure out how to get more detailed debug info.








Reply to: