Re: Question - Hamm, Mgetty, PPP, wtmp - Arrgh!
> On Mon, Feb 16, 1998 at 01:06:59PM -0600, Jeff Noxon wrote:
>> I have three dial-in modems on my hamm box. They are all identical
>> USR Couriers AFIAK, and their configuration *appears* to be the same.
>> But one port always shows connect speed in wtmp, and the others do not:
>
> Are you sure that they are both set to report the same connect string?
> Usually modems allow varying amounts of detail to be reported
> on the "CONNECT" line, which is where mgetty gets this data from.
> I don't know what the appropriate commands are for a USR Courier
> (look at S95 and the W command for Rockwells).
>
>> Back when I ran bo, I got connect speeds for all three modems. My hamm
>> packages are all 100% up-to-date.
>
> Any chance the modems are configured differently now, either by
> the profile stored in the modem or due to commands in /etc/mgetty/*.conf?
>
> hamish
Mabey some other process (perhaps one that dials out from the system) has
changed some of the modem settings ?
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: