Re: Question - Hamm, Mgetty, PPP, wtmp - Arrgh!
On Mon, Feb 16, 1998 at 01:06:59PM -0600, Jeff Noxon wrote:
> I have three dial-in modems on my hamm box. They are all identical
> USR Couriers AFIAK, and their configuration *appears* to be the same.
> But one port always shows connect speed in wtmp, and the others do not:
Are you sure that they are both set to report the same connect string?
Usually modems allow varying amounts of detail to be reported
on the "CONNECT" line, which is where mgetty gets this data from.
I don't know what the appropriate commands are for a USR Courier
(look at S95 and the W command for Rockwells).
> Back when I ran bo, I got connect speeds for all three modems. My hamm
> packages are all 100% up-to-date.
Any chance the modems are configured differently now, either by
the profile stored in the modem or due to commands in /etc/mgetty/*.conf?
hamish
--
Hamish Moffatt, hamish@debian.org, hamish@rising.com.au, hmoffatt@mail.com
Latest Debian packages at ftp://ftp.rising.com.au/pub/hamish. PGP#EFA6B9D5
CCs of replies from mailing lists are welcome. http://hamish.home.ml.org
--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org .
Trouble? e-mail to templin@bucknell.edu .
Reply to: