[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Can't install Debian Linux on a 586 with 166mmx tech!



big44m3@ix.netcom.com writes:
> 
> When i get to the place where it says to install base files i choose to
> install from a floppy.  It asks for disk#1 and when i do it comes up
> with the message of it dosen't look like disk#1 and i tryed it again and
> it still comes up with the same message!  Could you help me with the
> installation of Debian Linux. I have all of the files nessary files to
> install Debian Linux.  I have 32 mega byites of ram do I need the base
> floppies?  The base Images from the ftp site do not look like the ones
> on the web page about installing Debian inux.  On that web page  it hase
> the base14-1.bin and so on, and on the ftp site it has base-1.bin. What
> do I to put the base image on the 1.44 floppy disks. The way it is on
> the ftp site, when i use rawrite to put the base images on to the floppy
> it rites the source code one the floppy. the base-2.bin it makes the
> floppy unuseable.  Please tell me How to do it right so I can install
> Debian Linux Operating system on my machine.  I want to be able to use
> Debian Linux. 

> From: Alex Yukhimets <aqy6633@acf5.nyu.edu>
> Download  base-1.bin,...,base-4.bin, drv1440.bin, and resc1440.bin
> files from ftp.debian.org/bo/disks-i386/current/.
> Use rawrite2 to make 7 floppies from the above files.
> Insert resc1440 floppy and reboot the computer.
> A little later it askes to insert _RESCUE_ disk (i.e resc1440) and only
> then base-1, etc. Note, that resc1440 should normally be in the drive at
> the time it is asked to be inserted. The problems with disks are usually
> the reflection of bad blocks on them. Use rawrite2 to create another
> set of disks on different floppies.

Additionally, I recommend that you format the floppies just prior to using
rawrite2. Floppies with a fresh format have fewer problems (just my personal
experience).

-- 
-= Sent by Debian 1.3 Linux =-
Thomas Kocourek  KD4CIK 
@_@tko@westgac3.dragon.com Remove @_@ for correct Email address
--... ...-- ...  -.. .  -.- -.. ....- -.-. .. -.-


--
TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to
debian-user-request@lists.debian.org . 
Trouble?  e-mail to templin@bucknell.edu .


Reply to: