Fwd: Re: No Parten las X - Fatal server error: no screens found!!
Primero agradesco a todos los que por lo menos leyeron
este mail y mas aun a los que acudieron en ayuda de
este desamparado....
WWWWW
'__ __'
C o||o
o
__
* Puedes intentar detectarlo haciendo "XFree86 -
* configure", esto genera un archivo de configuración
* de X, que puedes probar con "XFree86 -xf86config
* nombredearchivo", si funciona bien puedes cambiarlo
* por el fichero de configuración
* actual /etc/X11/XF86Config-4, aunque es mejor que
* simplemente sustitullas las lineas de video y del
* monitor en el fichero antiguo con las lineas de
* video y del monitor del fichero generado por
* XFree86 -configure, puesto que a mi no me detectó
* bien otros dispositivos como el raton etc.
Aqui va la parte final de la salida de
XFree86 -configure
Fatal server error:
XFree86 has found a valid card configuration.
Unfortunately the appropiate data has not been added
to xf86PciInfo.h. Please forward 'scanpci -v' output
to XFree86 support team.
When reporting a problem related to a server crash,
please send the full server output, not just the last
messages. This can be found in the log file
"/var/log/XFree86.0.log". Please report problems to
submit@bugs.debian.org.
*
Por lo que entiendo este comando intenta chequear
todos los drivers disponibles y de haber alguno que
sea compatible arroja un archivo de salida.... Lo que
no sucedio...
*
entonces realize el scanpci -v..... la parte final que
creo corresponde a la parte de VGA es la sgte:
pci bus 0x1 cardnum 0x00 function 0x0000: vendor
0x5333 device 0x8d04
S3 Device unknown
CardVendor 0x5333 card 0x8d04 (S3, Card unknown)
STATUS 0x0230 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE
0x08
BASE0 0xed000000 addr 0xed000000 MEM
BASE1 0xe0000008 addr 0xe0000000 MEM
PREFETCHABLE
MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE
0x0b
BYTE_0 0x03 BYTE_1 0x00 BYTE_2 0x806e500
BYTE_3 0xffffffff
de todas maneras adjunto va el resultado completo de
este archivo y los que siguen :
1- lspci
2- lsmod
3- XFree86.0.log
4- scanpci -v
¿? XFree86 -configure (No pude volcar la salida {:-|}
XFree86 -configure > salida.txt
- o - o - o - o - o - o - o - o - o - o - o - o - o -
Aun no descargo el knoppix......
*******************************************************
Antonio Castro
*******************************************************
Os cuento mi truquito particular para estas cosas.
Muchos de los archivos que tienen que ver en la
configuracion de Linux se encuentran en alguna parte
de /etc.
knoppix autodetecta y configura perfectamente y solito
la mayor parte del hardware.
Arrancando desde knoppix se puede volcar a algún
sitio el directorio /etc de knoppix. Por ejemplo se
monta la partición donde estamos intentando instalar y
configurar debian y copiamos todo en un directorio.
Por ejemplo despues de montar en modo escritura la
partición /dev/hddx sobre /mnt/hddxx/ creamos un
directorio /mnt/hddxx/root/knoppix_etc y volcamos
desreferenciando todos los links simbolícos incluidos
en /etc.
cd /etc
find . | cpio -pdmL /mnt/hddxx/root/knoppix_etc
De esa forma cuando estemos instalando y configurando
podremos usar /root/knoppix_etc como una autentica
chuleta. Si knoppix ha detectado correctamente la
tarjeta de video, el raton, la tarjeta de audio
integrada en placa base de la cual carecemos de
absoluta información, tarjeta de red, etc, etc...
Mmmmmm ... a si si knoppix ha detectado todo eso pues
tendremos una chuleta excelente y puede que parte del
trabajo sea sobreescribir algunos ficheros con otros
aunque lo suyo es comparar y tomar lo que consideremos
oportuno de cada caso.
Yo lo estoy haciendo así y logicamente hay cosas que
no están en /etc pero es una excelente ayuda.
Un saludo
Antonio Castro
*******************************************************
Gracias por sus valiosos comentarios, que dia a dia
hace mas real la opcion de usar software libre.
Gerardo Antonio Castro Cuevas.
Santiago de Chile.
------------
Internet GRATIS es Yahoo! Conexión
4004-1010 desde Buenos Aires. Usuario: yahoo; contraseña: yahoo
Más ciudades: http://conexion.yahoo.com.ar
#lspci
00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3148
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:08.0 Ethernet controller: Davicom Semiconductor, Inc. Ethernet 100/10 MBit (rev 31)
00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3177
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC97 Modem Controller (rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. Ethernet Controller (rev 74)
01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8d04
#lsmod
Module Size Used by Not tainted
nls_cp437 4384 4 (autoclean)
apm 9148 0
dmfe 13276 1
keybdev 1664 0 (unused)
usbkbd 2848 0 (unused)
input 3072 0 [keybdev usbkbd]
usb-uhci 20708 0 (unused)
usbcore 48032 0 [usbkbd usb-uhci]
#XFree86.0.log
This is a pre-release version of XFree86, and is not supported in any
way. Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org. Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)
XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
If the server is older than 6-12 months, or if your card is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Jul 31 15:45:45 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Generic Monitor"
(**) | |-->Device "Sabage4 2D/3D Controlador Grafico y Acelerador Integrada"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "es"
(**) XKB: layout: "es"
(**) Option "XkbVariant" "es"
(**) XKB: variant: "es"
(**) Option "XkbOptions" "es"
(**) XKB: options: "es"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7
(WW) Open APM failed
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.1
XFree86 Video Driver: 0.4
XFree86 XInput driver : 0.2
XFree86 Server Extension : 0.1
XFree86 Font Renderer : 0.2
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80000060, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3148 card 1106,3148 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:08:0: chip 1282,9102 card 3030,5032 rev 31 class 02,00,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1106,4161 rev 50 class 04,01,00 hdr 00
(II) PCI: 00:11:6: chip 1106,3068 card 1543,4c21 rev 80 class 07,80,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 0000,0000 rev 74 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d04 card 5333,8d04 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.4
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xec000000 - 0xedffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:17:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) S3 unknown chipset (0x8d04) rev 0, Mem @ 0xed000000/19, 0xe0000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xef002000 - 0xef0020ff (0x100) MX[B]
[1] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B]
[2] -1 0 0xef000000 - 0xef0000ff (0x100) MX[B]
[3] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[5] -1 0 0xed000000 - 0xed07ffff (0x80000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[11] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xef002000 - 0xef0020ff (0x100) MX[B]
[1] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B]
[2] -1 0 0xef000000 - 0xef0000ff (0x100) MX[B]
[3] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[4] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[5] -1 0 0xed000000 - 0xed07ffff (0x80000) MX[B](B)
[6] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[7] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[8] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[9] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[10] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[11] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[12] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[13] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xef002000 - 0xef0020ff (0x100) MX[B]
[6] -1 0 0xef001000 - 0xef0010ff (0x100) MX[B]
[7] -1 0 0xef000000 - 0xef0000ff (0x100) MX[B]
[8] -1 0 0xe8000000 - 0xebffffff (0x4000000) MX[B]
[9] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[10] -1 0 0xed000000 - 0xed07ffff (0x80000) MX[B](B)
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x0000ec00 - 0x0000ecff (0x100) IX[B]
[14] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[15] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[16] -1 0 0x0000e000 - 0x0000e00f (0x10) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[18] -1 0 0x0000d800 - 0x0000d81f (0x20) IX[B]
[19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B]
[20] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.9
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "pex5"
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension X3D-PEX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.2
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "xie"
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XIE
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.1.16
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.4
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.1.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.2
(II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister,
TwisterK
(II) Primary Device is: PCI 01:00:0
(EE) No devices detected.
Fatal server error:
no screens found
When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.
#scanpci -v
pci bus 0x0 cardnum 0x00 function 0x0000: vendor 0x1106 device 0x3148
VIA Device unknown
CardVendor 0x1106 card 0x3148 (VIA, Card unknown)
STATUS 0xa230 COMMAND 0x0006
CLASS 0x06 0x00 0x00 REVISION 0x00
HEADER 0x00 LATENCY 0x08
pci bus 0x0 cardnum 0x01 function 0x0000: vendor 0x1106 device 0xb091
VIA Device unknown
STATUS 0xa230 COMMAND 0x0107
CLASS 0x06 0x04 0x00 REVISION 0x00
HEADER 0x01 LATENCY 0x00
PRIBUS 0x00 SECBUS 0x01 SUBBUS 0x01 SECLT 0x00
IOBASE 0xf000 IOLIM 0xfff SECSTATUS 0x0000
NOPREFETCH_MEMBASE 0xec000000 MEMLIM 0xedffffff
PREFETCH_MEMBASE 0xe0000000 MEMLIM 0xe7ffffff
NO_FAST_B2B NO_SEC_BUS_RST NO_M_ABRT VGA_EN ISA_EN NO_PERR_EN
pci bus 0x0 cardnum 0x08 function 0x0000: vendor 0x1282 device 0x9102
Device unknown
CardVendor 0x3030 card 0x5032 (Card unknown)
STATUS 0x8210 COMMAND 0x0007
CLASS 0x02 0x00 0x00 REVISION 0x31
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE0 0x0000d001 addr 0x0000d000 I/O
BASE1 0xef000000 addr 0xef000000 MEM
MAX_LAT 0x28 MIN_GNT 0x14 INT_PIN 0x01 INT_LINE 0x0b
pci bus 0x0 cardnum 0x10 function 0x0000: vendor 0x1106 device 0x3038
VIA VT 82C586 MVP3 USB Controller
CardVendor 0x1106 card 0x3038 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0007
CLASS 0x0c 0x03 0x00 REVISION 0x80
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE4 0x0000d401 addr 0x0000d400 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x806c5c8 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x10 function 0x0001: vendor 0x1106 device 0x3038
VIA VT 82C586 MVP3 USB Controller
CardVendor 0x1106 card 0x3038 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0007
CLASS 0x0c 0x03 0x00 REVISION 0x80
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE4 0x0000d801 addr 0x0000d800 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x02 INT_LINE 0x0b
BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x806c940 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x10 function 0x0002: vendor 0x1106 device 0x3038
VIA VT 82C586 MVP3 USB Controller
CardVendor 0x1106 card 0x3038 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0007
CLASS 0x0c 0x03 0x00 REVISION 0x80
BIST 0x00 HEADER 0x80 LATENCY 0x20 CACHE 0x08
BASE4 0x0000dc01 addr 0x0000dc00 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x05
BYTE_0 0x31240 BYTE_1 0x00 BYTE_2 0x806ccb8 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x10 function 0x0003: vendor 0x1106 device 0x3104
VIA Device unknown
CardVendor 0x1106 card 0x3104 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0007
CLASS 0x0c 0x03 0x20 REVISION 0x82
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xef001000 addr 0xef001000 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x04 INT_LINE 0x03
BYTE_0 0x30000 BYTE_1 0x00 BYTE_2 0x806d030 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x11 function 0x0000: vendor 0x1106 device 0x3177
VIA Device unknown
CardVendor 0x1106 card 0x3177 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0087
CLASS 0x06 0x01 0x00 REVISION 0x00
HEADER 0x80 LATENCY 0x00
pci bus 0x0 cardnum 0x11 function 0x0001: vendor 0x1106 device 0x0571
VIA VT 82C586 MVP3 IDE Bridge
CardVendor 0x1106 card 0x0571 (VIA, Card unknown)
STATUS 0x0290 COMMAND 0x0007
CLASS 0x01 0x01 0x8a REVISION 0x06
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x00
BASE4 0x0000e001 addr 0x0000e000 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0xff
BYTE_0 0x509f20b BYTE_1 0x00 BYTE_2 0x806d720 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x11 function 0x0005: vendor 0x1106 device 0x3059
VIA Device unknown
CardVendor 0x1106 card 0x4161 (VIA, Card unknown)
STATUS 0x0210 COMMAND 0x0001
CLASS 0x04 0x01 0x00 REVISION 0x50
BASE0 0x0000e401 addr 0x0000e400 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x05
BYTE_0 0xca05 BYTE_1 0x00 BYTE_2 0x806da98 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x11 function 0x0006: vendor 0x1106 device 0x3068
VIA VT 8501 MVP4 Modem
CardVendor 0x1543 card 0x4c21 (Card unknown)
STATUS 0x0210 COMMAND 0x0001
CLASS 0x07 0x80 0x00 REVISION 0x80
BASE0 0x0000e801 addr 0x0000e800 I/O
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x03 INT_LINE 0x05
BYTE_0 0xca05 BYTE_1 0x00 BYTE_2 0x806de10 BYTE_3 0xffffffff
pci bus 0x0 cardnum 0x12 function 0x0000: vendor 0x1106 device 0x3065
VIA Device unknown
STATUS 0x0210 COMMAND 0x0007
CLASS 0x02 0x00 0x00 REVISION 0x74
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0x0000ec01 addr 0x0000ec00 I/O
BASE1 0xef002000 addr 0xef002000 MEM
MAX_LAT 0x08 MIN_GNT 0x03 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0xfe020001 BYTE_1 0x00 BYTE_2 0x806e188 BYTE_3 0xffffffff
pci bus 0x1 cardnum 0x00 function 0x0000: vendor 0x5333 device 0x8d04
S3 Device unknown
CardVendor 0x5333 card 0x8d04 (S3, Card unknown)
STATUS 0x0230 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0x00
BIST 0x00 HEADER 0x00 LATENCY 0x20 CACHE 0x08
BASE0 0xed000000 addr 0xed000000 MEM
BASE1 0xe0000008 addr 0xe0000000 MEM PREFETCHABLE
MAX_LAT 0xff MIN_GNT 0x04 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x03 BYTE_1 0x00 BYTE_2 0x806e500 BYTE_3 0xffffffff
Reply to: