No consigo hacer funciona una Miro PCTV Pro
La conecto, compilo el kernel como para una Miro PCTV(que tenía antes y
funcionaba), pongo esto en el fichero /etc/modutils.conf:
# Modulos para la tarjeta sintonizadora de TV
#
# i2c
alias char-major-89 i2c-dev
options i2c-core i2c_debug=1
options i2c-algo-bit bit_test=1
# bttv
alias char-major-81 videodev
alias char-major-81-0 bttv
alias char-major-81-64 bttv
options bttv card=11 radio=1 pll=1
options tuner type=2 debug=1
#
# msp3400
options snd-card-ens snd_index=0
options msp3400 mixer=1
#
# lirc
alias char-major-61 lirc_gpio
#options lirc_gpio irq=4 io=0x3e8
y al ejecutar xawtv no me funciona, sale en negro y sin sonido y cuando
pongo dmesg | grep bttv puedo ver esto:
bttv: driver version 0.7.83 loaded
bttv: using 2 buffers with 2080k (4160k total) for capture
bttv: Host bridge is Advanced Micro Devices [AMD] AMD-751 [Irongate]
System Controller
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:09.0, irq: 9, latency: 64, memory: 0xeddfd000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(MIRO PCTV pro) [card=11,insmod option]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=EEPROM chip,ok]
bttv0: i2c attach [client=MSP3410G-B11,ok]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: miro: id=30 tuner=4 radio=matchbox stereo=yes
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: i2c attach [client=NoTuner,ok]
bttv0: PLL: 28636363 => 35468950 ... ok
Aunque ponga card=39 tampoco funciona, ¿alguno sabeis de que puede ser o
me podeis pasar una configuración que funcione?
Reply to: