[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Re: Apagar CD-RW com Cdrecord



> cdrecord -v speed=12 dev=/dev/cdrom blank=fast
> 
> (ou no lugar do "fast" vc coloca "all", e tb no device vc pode usar
> o resultado do "$cdrecord -scanbus" algo parecido com "dev=0,0,0")
> 
> Aqui funciona,
> Até mais,
> Fernando Sato
 
Obrigado pela resposta!!
Eu testei desse jeito e dá o seguinte erro:

[root@dados /]# cdrecord -v speed=12 dev=/dev/hda blank=all
Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004
Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: The author of cdrecord should not be bothered with problems in
this version.
TOC Type: 1 = CD-ROM
scsidev: '/dev/hda'
devname: '/dev/hda'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVDRRW GWA-4164B'
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0016
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011 (current)
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
cdrecord: Found DVD media: using cdr_mdvd.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags   : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1409024 = 1376 KB
Current Secsize: 2048
resid: 2
resid: 2
  ATIP start of lead in:  -150 (00:00/00)
Disk type:    unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
scsi_set_streaming
Speed set to 5540 KB/s
Starting to write CD/DVD at speed   4.0 in real BLANK mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Performing OPC...
Blanking entire disk
cdrecord: Success. blank unit: scsi sendcmd: no error
CDB:  A1 00 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 30 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x30 Qual 0x00 (incompatible medium installed) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 9600s
cdrecord: Cannot blank disk, aborting.

[]`s

-- 
=====
"O único homem que está isento de erros, é aquele que não arrisca acertar."
                                - Albert Einstein

"O Mais Sábio dos Homens é aquele que sabe que nada sabe!!"
                                - Sócrates

"A alegria não está nas coisas: está em nós! Acredito que ter as
coisas que queremos
pode até nos trazer uma alegria momentânea, mas ser o que queremos ser, 
fazer o que sonhamos é que nos traz a verdadeira alegria!
                                - Göethe



Reply to: