Nokia Handy mit usb mounten
Hallo,
habe hier ein Nokia 2730 classic und möchte dieses gerne per usb-kabel
in meinem Wheezy mounten um Daten zu transferieren. Leider geht dies
nicht, ansonsten habe ich mit usb keine Probleme.
# dmesg
[ 3645.422742] hub 1-1:1.0: unable to enumerate USB device on port 2
[ 3645.798011] usb 1-1.2: new full speed USB device number 4 using
ehci_hcd
[ 3645.893011] usb 1-1.2: New USB device found, idVendor=0421,
idProduct=02ba
[ 3645.893015] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3645.893017] usb 1-1.2: Product: Nokia 2730 classic
[ 3645.893019] usb 1-1.2: Manufacturer: Nokia
[ 3646.104530] NET: Registered protocol family 35
[ 3646.106475] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[ 3646.107300] usbcore: registered new interface driver cdc_acm
[ 3646.107302] cdc_acm: USB Abstract Control Model driver for USB modems
and ISDN adapters
[ 3646.110861] usbcore: registered new interface driver cdc_phonet
[ 3646.116491] usbcore: registered new interface driver cdc_ether
[ 3646.130817] usb 1-1.2: bad CDC descriptors
[ 3646.130837] usbcore: registered new interface driver rndis_host
[ 3646.151320] cfg80211: Calling CRDA to update world regulatory domain
[ 3646.157514] usb 1-1.2: bad CDC descriptors
[ 3646.157553] usbcore: registered new interface driver rndis_wlan
[ 3647.295312] usb 1-1.2: USB disconnect, device number 4
[ 3651.286844] usb 1-1.2: new full speed USB device number 5 using
ehci_hcd
[ 3651.382465] usb 1-1.2: New USB device found, idVendor=0421,
idProduct=02ba
[ 3651.382469] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3651.382471] usb 1-1.2: Product: Nokia 2730 classic
[ 3651.382473] usb 1-1.2: Manufacturer: Nokia
[ 3651.435923] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
[ 3651.436831] usb 1-1.2: bad CDC descriptors
[ 3651.436878] usb 1-1.2: bad CDC descriptors
[ 3651.897305] usb 1-1.2: USB disconnect, device number 5
#dmesg | grep usb
[ 3645.798011] usb 1-1.2: new full speed USB device number 4 using
ehci_hcd
[ 3645.893011] usb 1-1.2: New USB device found, idVendor=0421,
idProduct=02ba
[ 3645.893015] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3645.893017] usb 1-1.2: Product: Nokia 2730 classic
[ 3645.893019] usb 1-1.2: Manufacturer: Nokia
[ 3646.107300] usbcore: registered new interface driver cdc_acm
[ 3646.110861] usbcore: registered new interface driver cdc_phonet
[ 3646.116491] usbcore: registered new interface driver cdc_ether
[ 3646.130817] usb 1-1.2: bad CDC descriptors
[ 3646.130837] usbcore: registered new interface driver rndis_host
[ 3646.157514] usb 1-1.2: bad CDC descriptors
[ 3646.157553] usbcore: registered new interface driver rndis_wlan
[ 3647.295312] usb 1-1.2: USB disconnect, device number 4
[ 3651.286844] usb 1-1.2: new full speed USB device number 5 using
ehci_hcd
[ 3651.382465] usb 1-1.2: New USB device found, idVendor=0421,
idProduct=02ba
[ 3651.382469] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[ 3651.382471] usb 1-1.2: Product: Nokia 2730 classic
[ 3651.382473] usb 1-1.2: Manufacturer: Nokia
[ 3651.436831] usb 1-1.2: bad CDC descriptors
[ 3651.436878] usb 1-1.2: bad CDC descriptors
[ 3651.897305] usb 1-1.2: USB disconnect, device number 5
[ 4856.908443] usbserial: Unknown parameter `Vendor'
[ 4889.084369] usbserial: `02ba' invalid for parameter `product'
danach habe ich es versucht mit:
# mount /dev/ttyACM0
mount: can't find /dev/ttyACM0 in /etc/fstab or /etc/mtab
# lsusb zeigt das Handy auch nicht an.
# modprobe usbserial vendor=0421 product=02ba
FATAL: Error inserting usbserial (/lib/modules/3.1.0-1-
amd64/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
Anscheinend mache ich was falsch, aber was? Danke für eure Ratschläge!
--
Einen Schönen Gruß,
Sigi
Reply to: