Re: Nokia Handy mit usb mounten
On 11/27/2011 05:45 PM Siegfrid Brandstätter wrote:
> Hallo,
> habe hier ein Nokia 2730 classic und möchte dieses gerne per usb-kabel
> in meinem Wheezy mounten um Daten zu transferieren. Leider geht dies
> nicht, ansonsten habe ich mit usb keine Probleme.
>
> # dmesg
> [ 3645.422742] hub 1-1:1.0: unable to enumerate USB device on port 2
> [ 3645.798011] usb 1-1.2: new full speed USB device number 4 using
> ehci_hcd
> [ 3645.893011] usb 1-1.2: New USB device found, idVendor=0421,
> idProduct=02ba
> [ 3645.893015] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3645.893017] usb 1-1.2: Product: Nokia 2730 classic
> [ 3645.893019] usb 1-1.2: Manufacturer: Nokia
> [ 3646.104530] NET: Registered protocol family 35
> [ 3646.106475] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
> [ 3646.107300] usbcore: registered new interface driver cdc_acm
> [ 3646.107302] cdc_acm: USB Abstract Control Model driver for USB modems
> and ISDN adapters
> [ 3646.110861] usbcore: registered new interface driver cdc_phonet
> [ 3646.116491] usbcore: registered new interface driver cdc_ether
> [ 3646.130817] usb 1-1.2: bad CDC descriptors
> [ 3646.130837] usbcore: registered new interface driver rndis_host
> [ 3646.151320] cfg80211: Calling CRDA to update world regulatory domain
> [ 3646.157514] usb 1-1.2: bad CDC descriptors
> [ 3646.157553] usbcore: registered new interface driver rndis_wlan
> [ 3647.295312] usb 1-1.2: USB disconnect, device number 4
> [ 3651.286844] usb 1-1.2: new full speed USB device number 5 using
> ehci_hcd
> [ 3651.382465] usb 1-1.2: New USB device found, idVendor=0421,
> idProduct=02ba
> [ 3651.382469] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3651.382471] usb 1-1.2: Product: Nokia 2730 classic
> [ 3651.382473] usb 1-1.2: Manufacturer: Nokia
> [ 3651.435923] cdc_acm 1-1.2:1.1: ttyACM0: USB ACM device
> [ 3651.436831] usb 1-1.2: bad CDC descriptors
> [ 3651.436878] usb 1-1.2: bad CDC descriptors
> [ 3651.897305] usb 1-1.2: USB disconnect, device number 5
>
>
> #dmesg | grep usb
>
> [ 3645.798011] usb 1-1.2: new full speed USB device number 4 using
> ehci_hcd
> [ 3645.893011] usb 1-1.2: New USB device found, idVendor=0421,
> idProduct=02ba
> [ 3645.893015] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3645.893017] usb 1-1.2: Product: Nokia 2730 classic
> [ 3645.893019] usb 1-1.2: Manufacturer: Nokia
> [ 3646.107300] usbcore: registered new interface driver cdc_acm
> [ 3646.110861] usbcore: registered new interface driver cdc_phonet
> [ 3646.116491] usbcore: registered new interface driver cdc_ether
> [ 3646.130817] usb 1-1.2: bad CDC descriptors
> [ 3646.130837] usbcore: registered new interface driver rndis_host
> [ 3646.157514] usb 1-1.2: bad CDC descriptors
> [ 3646.157553] usbcore: registered new interface driver rndis_wlan
> [ 3647.295312] usb 1-1.2: USB disconnect, device number 4
> [ 3651.286844] usb 1-1.2: new full speed USB device number 5 using
> ehci_hcd
> [ 3651.382465] usb 1-1.2: New USB device found, idVendor=0421,
> idProduct=02ba
> [ 3651.382469] usb 1-1.2: New USB device strings: Mfr=1, Product=2,
> SerialNumber=0
> [ 3651.382471] usb 1-1.2: Product: Nokia 2730 classic
> [ 3651.382473] usb 1-1.2: Manufacturer: Nokia
> [ 3651.436831] usb 1-1.2: bad CDC descriptors
> [ 3651.436878] usb 1-1.2: bad CDC descriptors
> [ 3651.897305] usb 1-1.2: USB disconnect, device number 5
> [ 4856.908443] usbserial: Unknown parameter `Vendor'
> [ 4889.084369] usbserial: `02ba' invalid for parameter `product'
>
>
>
> danach habe ich es versucht mit:
>
> # mount /dev/ttyACM0
> mount: can't find /dev/ttyACM0 in /etc/fstab or /etc/mtab
>
> # lsusb zeigt das Handy auch nicht an.
>
> # modprobe usbserial vendor=0421 product=02ba
> FATAL: Error inserting usbserial (/lib/modules/3.1.0-1-
> amd64/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
>
>
> Anscheinend mache ich was falsch, aber was? Danke für eure Ratschläge!
Welche Daten willst Du denn bitte von einem `USB modems and ISDN
adapter' transferieren? (Frage bezieht sich auf gezeigte mount und
modprobe Kommandos/Ausgabe.)
Wenn Das Geräte angeschlossen ist, einfach mal 'nen Blick nach
/proc/partitions werfen.
Gruß
Pascal
--
The trapper recommends today: c01dcofe.1133118@localdomain.org
Reply to: