Re: Devicenamen vertauscht nach Löschen einer Partition? GRUB?
Am Samstag, 29. April 2006 22:45 schrieb Andreas Pakulat:
> Du meinst wohl eher eine logische Partition, oder?
Richtig, das war ein Freudscher Verschreiber ;-)
>
> Was sagt fdisk -l?
sarge:~# fdisk -l
Disk /dev/hda: 60.0 GB, 60022480896 bytes
16 heads, 63 sectors/track, 116301 cylinders
Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 12480 6289416 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/hda2 12485 13500 512064 82 Linux swap / Solaris
Partition 2 does not end on cylinder boundary.
/dev/hda3 13501 55111 20971944 c W95 FAT32 (LBA)
Partition 3 does not end on cylinder boundary.
/dev/hda4 55112 109220 27270747+ f W95 Ext'd (LBA)
Partition 4 does not end on cylinder boundary.
/dev/hda5 55112 75911 10482822 83 Linux
/dev/hda6 75911 89203 6699073+ 83 Linux
/dev/hda7 96723 109220 6298803 83 Linux
> Weil du deine fstab nicht angepasst hast? Die Frage ist aber: Wenn dein
> root-fs wirklich auf hda7 liegt, was liegt dann auf hda6? Auch ein
> Linux?
Im Moment liegt sarge auf hda6 und eine SuSE auf hda7.
Diese beiden wurden wohl durch die gparted-Aktion vertauscht?
Doch warum?
Meine fstab habe ich nicht angepasst, nur menu.lst, trotzdem wird /dev/hda7
angezeigt, obwohl ich mit grub /dev/hda6 starte?
sarge:~# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hda7 / ext3 defaults,errors=remount-ro 0 1
/dev/hda5 /home ext3 defaults 0 2
/dev/hda2 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
/dev/hda3 /windows/D vfat
user,gid=users,umask=0002,iocharset=iso8859-1 0 0
Bin immer noch ratlos...
Gruß
Michael Lansche
Reply to: