Re: fglrx - ich mach irgendwas falsch...
Hi Daniel,
> Bitte lies doch mal die Links, die ich dir gegeben habe, weil langsam
> werde ich ärgerlich - derartige Fehler musst du schon selbst ausmerzen:
> http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html
> |CONFIG_FB_RADEON=y definitely causes problems, so disable it
> ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
so, jetzt habe ich mich der Seite auch noch gewidmet und sehr gründlich
gelesen. Die Konfiguration sollte soweit stimmen. Aber ich bin auf
folgendes gestossen:
-----
tobias@tuxbox:~$ fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.3 Mesa 4.0.4
-----
Gemäß Flavios Seite besteht also ein Problem.
Anbei der Output der /var/log/XFree86.0.log | grep fglrx.
Vielleicht kannst du mir noch weiter helfen!
Grüssle, Tobias
-----
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): pEnt->device->identifier=0x6f9760
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "OpenGLOverlay" "on"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "UseInternalAGPGART" "no"
(==) fglrx(0): Qbs disabled
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) fglrx(0): initializing int10
(WW) fglrx(0): Bad V_BIOS checksum
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(--) fglrx(0): Chipset: "MOBILITY RADEON 9600/9700 (M10/M11
4E50)" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x1734, PciSubDevice = 0x105f)
(--) fglrx(0): board vendor info: third party grafics adapter - NOT
original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xf0000000
(--) fglrx(0): MMIO registers at 0xfeaf0000
(--) fglrx(0): ROM-BIOS at 0xfeac0000
(--) fglrx(0): ChipExtRevID = 0x00
(--) fglrx(0): ChipIntRevID = 0x0C
(--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
(WW) fglrx(0): board is an unknown third party board, chipset is
supported
(II) fglrx(0): I2C bus "DDC" initialized.
(II) fglrx(0): Connector Layout from BIOS --------
(II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1,
ConnectorType-2
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) fglrx(0): I2C device "DDC:ddc2" removed.
(II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 0
(II) fglrx(0): Primary head:
(II) fglrx(0): Secondary head:
(II) fglrx(0):
(II) fglrx(0): DesktopSetup 0x0000
(II) fglrx(0): Panel ID string: Samsung LTN154X1 WXGA
(II) fglrx(0): Panel Size from BIOS: 1280x800
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Overlay disabled
(**) fglrx(0): OpenGL Overlay enabled
(II) fglrx(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Valid mode using on-chip RMX: 1280x800
(II) fglrx(0): Valid mode using on-chip RMX: 1024x768
(II) fglrx(0): Valid mode using on-chip RMX: 800x600
(II) fglrx(0): Valid mode using on-chip RMX: 640x480
(II) fglrx(0): Total 4 valid mode(s) found.
(--) fglrx(0): Virtual size is 1280x800 (pitch 1280)
(**) fglrx(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9
kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x800" 68.90 1280 1288 1328 1408 800 800
803 816
(**) fglrx(0): *Mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9
kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 68.90 1024 1288 1328 1408 768 800
803 816
(**) fglrx(0): *Mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9
kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 68.90 800 1288 1328 1408 600 800
803 816
(**) fglrx(0): *Mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9
kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 68.90 640 1288 1328 1408 480 800
803 816
(==) fglrx(0): DPI set to (75, 75)
(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(==) fglrx(0): FSAA Gamma enabled
(==) fglrx(0): FSAA Multisample Position is fix
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): cpuSpeedMHz: 0x0000031e
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(II) fglrx(0): UMM area: 0xf05e9000 (size=0x07a17000)
(II) fglrx(0): driver needs XFree86 version: 4.3.x
(II) fglrx(0): detected XFree86 version: 4.3.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xffffff0000079000
(II) fglrx(0): [drm] mapped SAREA 0xffffff0000079000 to 0x2a955fd000
(II) fglrx(0): [drm] framebuffer handle = 0xf0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.10.19
(II) fglrx(0): Date: Feb 9 2005
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.10
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0xfeaf0000
(II) fglrx(0): [agp] Mode=0x1f004e0b bridge: 0x1039/0x0755
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask 0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f004f0a
(II) fglrx(0): [agp] AGP protocoll is enabled for grafics board.
(cmd=0x1f004302)
(II) fglrx(0): [agp] grafics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xffffff0008381000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): front overlay: 0xf09d1000
(II) fglrx(0): back overlay: 0xf0acb000
(II) fglrx(0): video overlay: 0xf0bc5000
(II) fglrx(0): FBADPhys: 0xf0000000 FBMappedSize: 0x005e9000
(II) fglrx(0): Splitting WC range: base: 0xf0000000, size: 0x5e9000
(II) fglrx(0): Splitting WC range: base: 0xf0400000, size: 0x1e9000
(II) fglrx(0): Splitting WC range: base: 0xf0500000, size: 0xe9000
(II) fglrx(0): Splitting WC range: base: 0xf0580000, size: 0x69000
(II) fglrx(0): Splitting WC range: base: 0xf05c0000, size: 0x29000
(II) fglrx(0): Splitting WC range: base: 0xf05e0000, size: 0x9000
(==) fglrx(0): Write-combining range (0xf05e8000,0x1000)
(==) fglrx(0): Write-combining range (0xf05e0000,0x9000)
(==) fglrx(0): Write-combining range (0xf05c0000,0x29000)
(==) fglrx(0): Write-combining range (0xf0580000,0x69000)
(==) fglrx(0): Write-combining range (0xf0500000,0xe9000)
(==) fglrx(0): Write-combining range (0xf0400000,0x1e9000)
(==) fglrx(0): Write-combining range (0xf0000000,0x5e9000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,1210)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,800) (front color
buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 800)
(II) fglrx(0): Largest offscreen area available: 1280 x 402
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
Reply to: