Re: Sedlbauer Speedfax+ und Hylafax
Michael Hierweck wrote:
>
> Hallo!
>
> Ich bin jetzt wenigstens "ein bisschen" weitergekommen , allerdings
> bekomme ich mit Markus Konfiguratuion (unt meine Telefonnummer) folgende
> Ausgabe:
>
> Mar 12 15:28:40 kley FaxGetty[11875]: --> [2:OK]
> Mar 12 15:28:40 kley FaxGetty[11875]: <-- [12:ATS8=2S7=60\r]
> Mar 12 15:28:40 kley FaxGetty[11875]: --> [2:OK]
> Mar 12 15:28:40 kley FaxGetty[11875]: <-- [12:AT+FCLASS=?\r]
> Mar 12 15:28:41 kley FaxGetty[11875]: --> [5:ERROR]
> Mar 12 15:28:41 kley FaxGetty[11875]: MODEM set DTR OFF
> Mar 12 15:29:11 kley FaxGetty[11875]: MODEM set DTR OFF
> Mar 12 15:29:11 kley FaxGetty[11875]: DELAY 2600 ms
> Mar 12 15:29:13 kley FaxGetty[11875]: MODEM set DTR ON
> Mar 12 15:29:13 kley FaxGetty[11875]: MODEM set baud rate: 19200 baud,
> input flow NONE, output flow NONE
> Mar 12 15:29:13 kley FaxGetty[11875]: MODEM flush i/o
> Mar 12 15:29:13 kley FaxGetty[11875]: <-- [23:AT&E738834E0V1Q0S0=0H0\r]
> Mar 12 15:29:13 kley FaxGetty[11875]: --> [2:OK]
> Mar 12 15:29:13 kley FaxGetty[11875]: <-- [12:ATS8=2S7=60\r]
> Mar 12 15:29:13 kley FaxGetty[11875]: --> [2:OK]
> Mar 12 15:29:13 kley FaxGetty[11875]: <-- [12:AT+FCLASS=?\r]
> Mar 12 15:29:13 kley FaxGetty[11875]: --> [5:ERROR]
> Mar 12 15:29:13 kley FaxGetty[11875]: MODEM set DTR OFF
> Mar 12 15:29:13 kley FaxGetty[11875]: Unable to setup modem on
> /dev/ttyI0; giving up after 2 attempts
> Mar 12 15:29:13 kley FaxGetty[11875]: MODEM /dev/ttyI0 appears to be
> wedged
> Mar 12 15:29:13 kley FaxGetty[11875]: CLOSE /dev/ttyI0
> Mar 12 15:29:14 kley FaxGetty[11885]: OPEN /dev/ttyI0
> Mar 12 15:29:14 kley FaxGetty[11885]: MODEM set DTR OFF
> Mar 12 15:29:14 kley FaxGetty[11885]: DELAY 2600 ms
> Mar 12 15:29:16 kley FaxGetty[11885]: MODEM set DTR ON
> Mar 12 15:29:16 kley FaxGetty[11885]: MODEM set baud rate: 19200 baud,
> input flow NONE, output flow NONE
> Mar 12 15:29:16 kley FaxGetty[11885]: MODEM flush i/o
> Mar 12 15:29:16 kley FaxGetty[11885]: <-- [23:AT&E738834E0V1Q0S0=0H0\r]
> Mar 12 15:29:16 kley FaxGetty[11885]: --> [2:OK]
> Mar 12 15:29:16 kley FaxGetty[11885]: <-- [12:ATS8=2S7=60\r]
> Mar 12 15:29:16 kley FaxGetty[11885]: --> [2:OK]
> Mar 12 15:29:16 kley FaxGetty[11885]: <-- [12:AT+FCLASS=?\r]
> Mar 12 15:29:17 kley FaxGetty[11885]: --> [5:ERROR]
> Mar 12 15:29:17 kley FaxGetty[11885]: MODEM set DTR OFF
> Mar 12 15:29:17 kley FaxGetty[11885]: /dev/ttyI0: Can not initialize
> modem.
> Mar 12 15:29:27 kley FaxGetty[11885]: CAUGHT SIGNAL 15
> Mar 12 15:29:27 kley FaxGetty[11885]: CLOSE /dev/ttyI0
> Mar 12 15:29:27 kley FaxGetty[11889]: OPEN /dev/ttyI0
> Mar 12 15:29:27 kley FaxGetty[11889]: MODEM set DTR OFF
> Mar 12 15:29:27 kley FaxGetty[11889]: DELAY 2600 ms
> Mar 12 15:29:30 kley FaxGetty[11889]: MODEM set DTR ON
> Mar 12 15:29:30 kley FaxGetty[11889]: MODEM set baud rate: 19200 baud,
> input flow NONE, output flow NONE
> Mar 12 15:29:30 kley FaxGetty[11889]: MODEM flush i/o
> Mar 12 15:29:30 kley FaxGetty[11889]: <-- [23:AT&E738834E0V1Q0S0=0H0\r]
> Mar 12 15:29:30 kley FaxGetty[11889]: --> [2:OK]
> Mar 12 15:29:30 kley FaxGetty[11889]: <-- [12:ATS8=2S7=60\r]
> Mar 12 15:29:30 kley FaxGetty[11889]: --> [2:OK]
> Mar 12 15:29:30 kley FaxGetty[11889]: <-- [12:AT+FCLASS=?\r]
> Mar 12 15:29:30 kley FaxGetty[11889]: --> [5:ERROR]
> Mar 12 15:29:30 kley FaxGetty[11889]: MODEM set DTR OFF
> Mar 12 15:29:30 kley FaxGetty[11889]: /dev/ttyI0: Can not initialize
> modem.
>
> Offenbar schlägt der AT+FCLASS=?\r Befehl fehl... Ich kenne mich mit den
> AT-Kommandos gar nciht aus...
Welche Kernelmodule braucht man denn dafür?
Ich habe nur das isdn- und das hisax-Modul geladen. Das isdnfax-Modul
bruacht man doch im Fall der Speedfax+-Karte nicht, oder?
Michael
Reply to: