Re: Lenteur de démarrage extrême de Libreoffice
Le 2022-10-28 11:03, raivac a écrit :
Non, je n'ai même pas cherché à le faire, je suis exclusivement sur
GNU/Linux et les fabricants ne s'embêtent pas avec les « systèmes
exotiques ».
a défaut, un petit control du smart ?
Cf. fichier ci-joint.
Idem
je comprend bien, mais quand je regarde chez kingston, je vois qu'il y
a eu 3 mises a jour du firmware toutes après 2017.
au moins 2 mises a jour me semblent vraiment critiques...
Il y a méprise. Le disque SSD en question tourne sur la machine qui date
de 2012, mais je l'ai acheté en novembre 2020. La dernière révision du
firmware date de janvier 2020, soit 10 mois avant (mais peut-être que
mon disque a bel et bien été fabriqué avant cette date, je ne vois pas
comment je pourrais le savoir). Ceci étant, s'il faut flasher le
firmware du disque, je ne sais pas comment faire depuis GNU/Linux. La
commande fwupdate ne peut fonctionner, car j'utilise le BIOS legacy et
non l'UEFI.
ça dépend surtout du nombre d'écritures que fait ton système, mais il
faut absolument le faire de façon régulière.
le seul moyen de ne pas oublier, c'est que le système le fasse
automatiquement.
chez moi, c'est fstrim.service qui s'en occupe (systemd) une fois par
semaine.
Je viens d'activer le timer fstrim.
Sébastien
--
Sébastien Dinot
Ne goutez pas au logiciel libre, vous ne pourriez plus vous en passer !
https://www.palabritudes.net/
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-18-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Phison Driven SSDs
Device Model: KINGSTON SA400S37960G
Serial Number: 50026B7*********
LU WWN Device Id: 5 0026b7 *********
Firmware Version: SBFK61K1
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
TRIM Command: Available
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 4
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Oct 28 15:51:59 2022 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (65535) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 30) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x0032 100 100 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 8812
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 937
148 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
149 Unknown_Attribute 0x0000 100 100 000 Old_age Offline - 0
167 Write_Protect_Mode 0x0000 100 100 000 Old_age Offline - 0
168 SATA_Phy_Error_Count 0x0012 100 100 000 Old_age Always - 0
169 Bad_Block_Rate 0x0000 100 100 000 Old_age Offline - 18
170 Bad_Blk_Ct_Erl/Lat 0x0000 100 100 010 Old_age Offline - 0/44
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 MaxAvgErase_Ct 0x0000 100 100 000 Old_age Offline - 20 (Average 5)
181 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
182 Erase_Fail_Count 0x0000 100 100 000 Old_age Offline - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
192 Unsafe_Shutdown_Count 0x0012 100 100 000 Old_age Always - 13
194 Temperature_Celsius 0x0022 028 043 000 Old_age Always - 28 (Min/Max 17/43)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
199 SATA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
218 CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
231 SSD_Life_Left 0x0000 099 099 000 Old_age Offline - 99
233 Flash_Writes_GiB 0x0032 100 100 000 Old_age Always - 4104
241 Lifetime_Writes_GiB 0x0032 100 100 000 Old_age Always - 3682
242 Lifetime_Reads_GiB 0x0032 100 100 000 Old_age Always - 20248
244 Average_Erase_Count 0x0000 100 100 000 Old_age Offline - 5
245 Max_Erase_Count 0x0000 100 100 000 Old_age Offline - 20
246 Total_Erase_Count 0x0000 100 100 000 Old_age Offline - 501600
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8812 -
Selective Self-tests/Logging not supported
Reply to: