Re: changement de matériel et compatibilité Debian
Le Sun, 30 Oct 2011 18:14:12 +0100
"Jean-Yves F. Barbier" <12ukwn@gmail.com> a écrit:
> On Sun, 30 Oct 2011 18:01:31 +0100
> Gaëtan PERRIER <gaetan.perrier@neuf.fr> wrote:
>
> > Examining /etc/kernel/postinst.d.
> > run-parts: executing /etc/kernel/postinst.d/dkms
> > 3.0.0-2-686-pae /boot/vmlinuz-3.0.0-2-686-pae
> > dkms.conf: Error! No 'BUILT_MODULE_NAME' directive specified for record #0.
> > Error! Bad conf file.
> > File:
> > does not represent a valid dkms.conf file.
>
> ça ressemble à un fichier corrompu (sans doute dû au PB
> affectant l'IRQ des DMAs).
> recharge le package du kernel.
>
> mais là n'est pas le PB: tu veux mettre la charrue avant les boeufs;
> en dépannage on ne passe au PB suivant QUE quand le précédent est
> résolu (sauf bien sur si les PBs sont chaînés, mais c'est très rare).
> Sinon ça vire Tvite au bourbier inextricable.
>
Bon j'ai démarré en éditant à la main la ligne dans grub lors du boot. J'ai
rajouté noapic à la fin.
Malgré cela j'ai toujours :
[ 85.423102] irq 4: nobody cared (try booting with the "irqpoll" option)
[ 85.423109] Pid: 0, comm: swapper Tainted: P O 3.0.0-1-686-pae #1
[ 85.423112] Call Trace:
[ 85.423120] [<c1076f0c>] ? __report_bad_irq+0x15/0x8d
[ 85.423125] [<c1076f13>] ? __report_bad_irq+0x1c/0x8d
[ 85.423130] [<c1077225>] ? note_interrupt+0x11c/0x18b
[ 85.423134] [<c1075f4b>] ? handle_irq_event_percpu+0x145/0x15b
[ 85.423138] [<c10776fb>] ? unmask_irq+0x1a/0x1a
[ 85.423141] [<c1075f82>] ? handle_irq_event+0x21/0x37
[ 85.423144] [<c10776fb>] ? unmask_irq+0x1a/0x1a
[ 85.423147] [<c1077745>] ? handle_level_irq+0x4a/0x62
[ 85.423149] <IRQ> [<c100934f>] ? do_IRQ+0x2e/0x76
[ 85.423158] [<c103ae6b>] ? local_bh_enable+0x2/0x2
[ 85.423163] [<c12b29f0>] ? common_interrupt+0x30/0x38
[ 85.423167] [<c103ae6b>] ? local_bh_enable+0x2/0x2
[ 85.423171] [<c10300e0>] ? sched_fork+0x4d/0x179
[ 85.423175] [<c103a4ea>] ? arch_local_irq_enable+0x2/0x7
[ 85.423179] [<c103aead>] ? __do_softirq+0x42/0x130
[ 85.423183] [<c103ae6b>] ? local_bh_enable+0x2/0x2
[ 85.423185] <IRQ> [<c103b0f5>] ? irq_exit+0x32/0x80
[ 85.423191] [<c1009386>] ? do_IRQ+0x65/0x76
[ 85.423195] [<c12b29f0>] ? common_interrupt+0x30/0x38
[ 85.423215] [<f8471208>] ? arch_local_irq_enable+0x2/0x7 [processor]
[ 85.423223] [<f8471ce8>] ? acpi_idle_enter_bm+0x226/0x25f [processor]
[ 85.423228] [<c11fd733>] ? cpuidle_idle_call+0xb6/0x11e
[ 85.423231] [<c1007716>] ? cpu_idle+0x97/0xb8
[ 85.423242] [<c1424708>] ? start_kernel+0x339/0x33f
[ 85.423244] handlers:
[ 85.423250] [<f82d8264>] skge_intr
[ 85.423260] [<f8249234>] usb_hcd_irq
[ 85.423262] Disabling IRQ #4
Reply to: