Re: Copie hda->hdb : taille différente
Le mardi 20 mars 2007 17:51, Jacques L'helgoualc'h a écrit :
> Bulot Grégory a écrit, mardi 20 mars 2007, à 17:31 :
> [...]
>
> > - la bascule est physique : je retire le hda de la machine, je change le
> > hdb en master et je le branche à la place du hda
> > - hda Maxtor 80G diamond max 20 (9DN011-326)
> > - hdb Western digital 80G caviar (WD800BB)
>
> Compare les sorties de « hdparm -i » ?
hdparm -i /dev/hda /dev/hdb
/dev/hda:
Model=MAXTOR STM3802110A, FwRev=3.AAJ, SerialNo=9LR1WHNC
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6 ATA/ATAPI-7
* signifies the current active mode
/dev/hdb:
Model=WDC WD800BB-22JHC0, FwRev=05.01C05, SerialNo=WD-WMAM9JH94127
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=66
BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3
ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
Reply to: