Re: cdrecord

[David CABATON <cabaton_david@yahoo.fr>]

> Plusieurs solutions  (parce que je ne sais pas ce que signifie « 
> tester  » :
>
> Untiliser k3b, il va le trouver tout seul et utilisera le transport «  
> direct » avec /dev/hdx
>
> utiliser growisofs en ligne de commande
>
> utiliser graveman
>
> utiliser gnomebaker
>
> Je mets xcdroast en dernier car il existe une version patchée de  
> cdrecord. Il faut remarquer que le patch figure (ou figurait) dans 
> les  sources debian mais que le bianire était compilé sans cette 
> optino, ilf  audrait lire la doc associée.
>
>
> Et, pour les premiers essais, utiliser un DVD RW (+ ou - ...) 

Bon mon choix se pose sur gnomebaker...

voici les tests (noyau : 2.6.11-1-386) :
- je grave un CDRW que j'ai efface et j'importe les sessions
- je grave pas de CDR et je peux pas importer les sessions
- j'efface pas et je grave pas de DVD
- importer une session d'un DVD / CDRW
Erreur lors de la récupération des informations de session.
Re-load disk and hit <CR>
cdrecord: Warning: Running on Linux-2.6.11-1-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Cannot load media with this drive!
cdrecord: Try to load media by hand.
cdrecord: Aborted by EOF on input.


- gravure cd rw / dvd :
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent 
defaults.
cdrecord: Continuing in 5 seconds...
cdrecord: Warning: Running on Linux-2.6.11-1-386
cdrecord: There are unsettled issues with Linux-2.5 and newer.
cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris.
cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
cdrecord: Permission denied. WARNING: Cannot set priority using 
setpriority().
cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
SCSI buffer size: 64512
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW support 
code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details on 
DVD support.
Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J 
rg Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of 
cdrecord
     and thus may have bugs that are not present in the original version.
     Please send bug reports and support requests to 
<cdrtools@packages.debian.org>.
     The original author should not be bothered with problems of this 
version.

TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
atapi: 1
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : 'TSSTcorp'
Identifikation : 'CD/DVDW TS-L532A'
Revision       : 'TM30'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0011
Profile: 0x0013
Profile: 0x0014
Profile: 0x001A
Profile: 0x001B
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1451664 = 1417 KB
FIFO size      : 4194304 = 4096 KB
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Cannot load media with this drive!
cdrecord: Try to load media by hand.
Track 01: data     1 MB       
Total size:        1 MB (00:10.42) = 782 sectors
Lout start:        2 MB (00:12/32) = 782 sectors
Current Secsize: 2048
ATIP info from disk:
 Indicated writing power: 5
 Reference speed: 2
 Is not unrestricted
 Is erasable
 ATIP start of lead in:  -11635 (97:26/65)
 ATIP start of lead out: 359849 (79:59/74)
 1T speed low:  0 (reserved val  0) 1T speed high:  4
 2T speed low:  8 2T speed high:  0 (reserved val 10)
 power mult factor: 4 6
 recommended erase/write power: 3
 A1 values: 02 4C B0
 A2 values: 4A C8 36
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Trying to clear drive status.
Re-load disk and hit <CR>
Controlling file not open for reading, send SIGUSR1 to continue.


et j'arrive jamais à relire le CD !


Merci de votre aide

David